User Manual

DIMENSION "D1" = (DISC DIAMETER/2) - .37 (9,3)
CALIPER MOVES INWARD AS PAD WEARS, .38 (9,5) MAX.
INLET FITTING: M10 x 1.5 BANJO
DISC
DIAMETER
11.00 (279,4)
11.75 (298,5)
11.88 (301,8)
12.19 (319,6)
"E"
OUTSIDE RADIUS
6.82 (173,2)
7.19 (182,6)
7.26 (184,4)
7.41 (188,2)
DISC
WIDTH
.81 (20,6)
1.04 (26,4)
"B"
MOUNT OFFSET
1.67 (42,4)
1.80 (45,8)
.37 (9,3) MOUNT HEIGHT
"D1"
DISC
WIDTH
"B"
MOUNT
OFFSET
"E"
OUTSIDE
RADIUS
DISC/WHEEL CENTERLINE
TOP OF FRICTION
MATERIAL AND DISC
O.D. TO BE FLUSH
1.48
(37,6)
2.60 (66,0)
SMALL
PISTON/
2 PISTON
CALIPER
SMALL
PISTON/
2 PISTON
CALIPER
THIS CALIPER IS A DIRECT REPLACEMENT FOR FACTORY
CALIPERS USING THE D154 TYPE BRAKE PAD.
.69 (17,5)
MOUNT
HOLE
INLET FITTING
LARGE PISTON - SINGLE
PISTON CALIPER ONLY
5.46 (138,7)
MOUNT CENTER
6.65 (168,9)
D154 CALIPER, MOUNTING DIMENSIONS:
.67 (17,0)
.52
(13,2)
4.96 (126,0)
.52
(13,2)
4.89 (124,2)
2.56 (65,0)
INNER PAD ABOVE, OUTER BELOW
D154 CALIPER, TYPE D154 PAD DIMENSIONS AND ORDERING INFORMATION:
ORDERING INFORMATION, USER SERVICEABLE COMPONENTS:
CALIPER O-RING BLEED SCREW SLIDE PIN
PART NO.
PISTON KIT (4 PK) KIT (4 PK) KIT (4 PK)
120-11870 200-11793 130-12084 220-0627 230-11529
120-11871 200-11793 130-12084 220-0627 230-11529
120-11872 200-11794 130-4346 220-0627 230-11529
120-11873 200-11794 130-4346 220-0627 230-11529
120-11874 200-11795 130-2579 220-0627 230-11529
120-11875 200-11795 130-2579 220-0627 230-11529
AXLE SET P/N PAD TYPE / COMPOUND
15A - 6219K D154 A
PolyMatrix
15B - 3998K D154 B PolyMatrix
15C - 4420K D154 C PolyMatrix
15E - 6103K D154 E
PolyMatrix
15Q - 6831K D154 Q
PolyMatrix
150 - 8936K D154 10 BP-10 Smart Pad
150 - 9422K D154 20
BP-20 Smart Pad
Need additional information - fast? Utilizing your Smartphone, scan the image
at the left to jump to our web site. This code takes you to our home page and
social media sites where information is just a click away, or click here.
Wilwood • August 2012 • 805 / 388-1188 • Fax 805 / 388-4938 • www.wilwood.com
E-mail Technical Assistance: [e-mail]