Datasheet

ManualsBrandsWima ManualsCapacitorsCapacitor, Radial, 680pF, 650VAC, 1.6kVDC, 10%

08.11

WIMA FKP 1

Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil

Electrodes, Schoopage Contacts, Double-Sided Metallization and Self-Healing

Internal Series Connection for Highest Current Carrying Capability

PCM 15 mm to 37.5 mm

Special Features Electrical Data

˜ Extremely high pulse duty

˜ Self-healing

˜ Internal series connection

˜ Very low dissipation factor

˜ Negative capacitance change

versus temperature

˜ According to RoHS 2002/95/EC

Typical Applications

For high pulse and high frequency

applications e.g.

˜ Switch mode power supplies

˜ Converters in drives and power

electronics

˜ Deflection systems in monitors

and TV-sets

˜ Electronic ballasts

Construction

Dielectric:

Polypropylene (PP) film

Capacitor electrodes:

Aluminium foil and double-sided metallized

plastic film

Internal construction:

Plastic film

Metal foil electrode

Metal contact layer

(schoopage)

Terminating wire

Electrode carrier

plastic film metallized

on both sides

Encapsulation:

Solvent-resistant, flame-retardant plastic

case with epoxy resin seal, UL 94 V-0

Terminations:

Tinned wire.

Marking:

Colour: Red. Marking: Black.

Epoxy resin seal: Yellow

Dissipation factors at +20+ C: tan d

at f C0.1 mF 0.1 mF P C  0.22 mF

1 kHz

 3 x 10

-4

 3 x 10

-4

10 kHz

 4 x 10

-4

 6 x 10

-4

100 kHz

10 x 10

-4

–

Dielectric absorption:

0.05 %

Voltage derating:

A voltage derating factor of 1.35 % per K

must be applied from +85+ C for DC

voltages and from +75+ C for AC

voltages

Reliability:

Operational life  300 000 hours

Failure rate P 1 fit (0.5 x U

and 40+ C)

Capacitance range:

100 pF to 0.22 mF (E12-values on request)

Rated voltages:

400 VDC, 630 VDC, 1000 VDC, 1250 VDC,

1600 VDC, 2000 VDC, 4000 VDC, 6000 VDC

Capacitance tolerances:

±20%, ±10%, ±5% (other tolerances are

available subject to special enquiry)

Operating temperature range:

–55+ C to +100+ C

Climatic test category:

55/100/56 in accordance with IEC

Insulation resistance at +20+ C:

C  0.1 mF:  1 x 10

M¸

(mean value: 5 x 10

M¸)

C  0.1 mF:  30 000 sec (M¸ x mF)

(mean value: 100 000 sec)

Measuring voltage: 100 V/1 min.

Test voltage:

2 U

, 2 sec / 6 kV: 1.6 U

, 2 sec.

Maximum pulse rise time:

Capacitance max. pulse rise time V/

msec at T

< 40) C

pF/

400 VDC 630 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 4000 VDC 6000 VDC

100 ... 220 – – – – 56000 56000 – –

330 ... 680 – – – – 51000 56000 56000 56000

1000 ... 2200 29000 29000 29000 29000 46000 51000 51000 51000

3300 ... 6800 9000 14000 27000 29000 29000 29000 29000 29000

0.01 ... 0.022 9000 11000 11000 11000 11000 13000 13000 13000

0.033 ... 0.068 9000 11000 11000 11000 11000 11000 – –

0.1 ... 0.22 7000 11000 11000 11000 11000 – – –

for pulses equal to the rated voltage

Mechanical Tests

Pull test on pins:

d  0.8 l: 10 N in direction of pins

d > 0.8 l: 20 N in direction of pins

according to IEC 60068-2-21

Vibration:

6 hours at 10 ... 2000 Hz and 0.75 mm

displacement amplitude or 10 g in

accordance with IEC 60068-2-6

Low air density:

1kPa = 10 mbar in accordance with

IEC 60068-2-13

Bump test:

4000 bumps at 390 m/sec

in accordance with IEC 60068-2-29

Packing

Available taped and reeled up to and

including case size 15 x 26 x 31.5 /

PCM 27.5 mm.

Detailed taping information and graphs

at the end of the catalogue.

For further details and graphs please

refer to Technical Information.

Summary of content (9 pages)

PAGE 1
D WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, Double-Sided Metallization and Self-Healing Internal Series Connection for Highest Current Carrying Capability PCM 15 mm to 37.
PAGE 2
D WIMA FKP 1 Continuation General Data Capacitance 400 VDC/250 VAC* PCM** Part number L FKP1G011004B00_ _ _ _ 5 FKP1G011504B00_ _ _ _ 5 FKP1G012204B00_ _ _ _ 5 FKP1G013304B00_ _ _ _ 5 FKP1G014704B00_ _ _ _ 5 FKP1G016804B00_ _ _ _ 6 11 11 11 11 11 12.
PAGE 3
D WIMA FKP 14 Continuation General Data Capacitance 100 150 220 330 470 680 W H 1600 VDC/650 VAC* L PCM** Part number W H 2000 VDC/700 VAC* L PCM** Part number pF 5 „ 5 „ 5 „ 5 „ 5 „ 5 11 11 11 11 11 11 18 18 18 18 18 18 15 15 15 15 15 15 FKP1T001004B00_ _ _ _ 5 FKP1T001504B00_ _ _ _ 5 FKP1T002204B00_ _ _ _ 5 FKP1T003304B00_ _ _ _ 6 FKP1T004704B00_ _ _ _ 6 FKP1T006804B00_ _ _ _ 6 11 11
PAGE 4
D WIMA WIMAMKP FKP 10 4 Continuation Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide). WIMA FKP 1 Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide). Urms V 600 5 Urms V 5 250 2 0. 0. 1 102 02 2 µF 5 400 VDC 2 101 103 2 5 104 2 47 0. 0. 1 102 5 00 105 5 Urms V 5 400 2 10 0 22 0 p F p µF F 00 pF 0. 01 µF 0. 04 7 0. µF 22 µF 47 00 02 2 µF µF 630 VDC 10 pF 08.11 103 2 5 0.
PAGE 5
D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Wave soldering T A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 ° C. In practice a preheating duration of t P 5 min. has been proven to be best.
PAGE 6
D Typical Dimensions for Taping Configuration Vh P P2 Diagram 1: PCM 2.5/5/7.5mm W W1 W0 H H1 W2 P1 D0 d P t F P0 H1 P P1 H P1 d d P0 P2 F Diagram 2: PCM 10/15 mm Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components Designation Carrier tape width Dimensions for Radial Taping Symbol PCM 2.5 taping W P0 P2 F 18.0 p0.5 PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping 18.0 p0.5 18.
PAGE 7
D Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm Size PCM 2.5 mm 5 mm 7.5 mm 10 mm 15 mm 22.5 mm W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2,5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 bulk L 4.6 4.
PAGE 8
D Packing Units Quantities for Taped for Capacitors Capacitorswith with Radial Radial Pins in Leads PCM 2.5 mm to 22.5 mm Size PCM 27.5 mm 37.5 mm 48.5 mm 52.5 mm W 9 11 13 13 15 15 17 17 19 20 20 9 11 13 15 17 19 20 24 31 35 40 19 23 27 33 37 35 45 45 H 19 21 24 25 26 26 29 34.5 30 32 39.5 19 22 24 26 29 32 39.5 45.5 46 50 55 31 34 37.5 48 54 50 55 65 bulk L 31.5 31.5 31.5 33 31.5 33 31.5 31.5 31.5 33 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.
PAGE 9
D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Special features (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Lead length (untaped) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D 20 % bulk MKS 2 07.