Datasheet

ManualsBrandsWima ManualsCapacitorsY Capacitor, 22nF, 300VAC, 20%

10.05

WIMA MKP-Y2

Metallized Polypropylene (PP)

RFI-Capacitors Class Y2

PCM 10 mm and 15 mm

Special Features Electrical Data

˜ Reliable self-healing

˜ High degree of interference

suppression due to good

attenuation and low ESR

˜ According to RoHS 2002/95/EC

Typical Applications

Class Y2 RFI applications to meet

EMC regulations

˜ Capacitors connected to the

mains between phase or neutral

and earthed casing

˜ By-passing of the basic or

supplementary insulation, pulse

peak voltage  5 kV

˜ According to cULus also

approved for X1 applications

Construction

Dielectric:

Polypropylene (PP) film

Capacitor electrodes:

Vacuum-deposited

Internal construction:

Dielectric

Vacuum-deposited

electrode

Metal contact layer

(schoopage)

Terminating wire

Encapsulation:

Solvent-resistant, flame-retardent plastic

case with epoxy resin seal, UL 94 V-0

Terminations:

Tinned wire.

Marking:

Colour: Red. Marking: Black.

Capacitance range:

1000 pF to 0.022

m F

Rated voltages:

300 VAC

Capacitance tolerances:

±20%, ±10%

Operating temperature range:

–55) C to +105) C

Climatic test category:

55/105/56/C in accordance with IEC

Insulation resistance at +20+ C:

 15 x 10

M¸

Measuring voltage: 100 V/1 min.

Dissipation factors at + 20) C: tan

at f C  0.022 mF

1 kHz  10 x 10

-4

100 kHz  50 x 10

-4

Approvals:

Country Authority Specification Symbol Approval-No.

Germany VDE DIN EN 132 400 40008997

IEC 60384-14/2

USA/Canada UL UL 1414 (250 VAC) E 134915

C 22.2 No. 1 (250 VAC)

Test specifications:

In accordance with DIN EN 132 400

Maximum pulse rise time:

100 V/msec at U

= 425 V

Test voltage:

2700 VDC, 2 sec.

Reliability:

Operational life > 300 000 hours

Failure rate < 2 fit (0.5 x U

and 40) C)

Mechanical Tests

Pull test on leads:

10 N in direction of leads

according to IEC 60068-2-21

Vibration:

6 hours at 10 ... 2000 Hz and 0.75 mm

displacement amplitude or 10 g in

accordance with IEC 60068-2-6

Low air density:

1kPa = 10 mbar in accordance with

IEC 60068-2-13

Bump test:

4000 bumps at 390 m/sec

in accordance

with IEC 60068-2-29

Packing

Available taped and reeled.

Detailed taping information and graphs

at the end of the catalogue.

For further details and graphs please

refer to Technical Information.

PCM 15: double series connection

Summary of content (4 pages)

PAGE 1
D WIMA MKP-Y2 Metallized Polypropylene (PP) RFI-Capacitors Class Y2 PCM 10 mm and 15 mm Special Features Electrical Data ˜ Reliable self-healing ˜ High degree of interference suppression due to good attenuation and low ESR ˜ According to RoHS 2002/95/EC Typical Applications Class Y2 RFI applications to meet EMC regulations ˜ Capacitors connected to the mains between phase or neutral and earthed casing ˜ By-passing of the basic or supplementary insulation, pulse peak voltage 5 kV ˜ According to cULus a
PAGE 2
D WIMA MKP-Y2 Continuation General Data Capacitance 300 VAC* W H L PCM** 1000 pF 4 9.5 13 10 1500 " 4 9.5 13 10 2200 " 4 9.5 13 10 3300 " 5 11 13 10 4700 " 5 11 13 10 6800 " 6 12.5 13 10 0.01 mF 5 11 18 15 0.015 " 6 12.5 18 15 0.022 " 7 14 18 15 * f = 50/60 Hz W ** PCM = Printed circuit module = lead spacing L Dims. in mm. H Taped version see page 100. d = 0.7 l if PCM 10 d = 0.8 l if PCM 15 d PCM at the lead exit points ( 0.4) 10.
PAGE 3
D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Wave soldering T A preheating of through-hole WIMA capacitors is allowed for temperatures T max < 100 ° C. In practice a preheating duration of t < 5 min. has been proven to be best.
PAGE 4
D Typical Dimensions for Taping Configuration )h P P2 Diagram 1: PCM 2.5/5/7.5mm W W1 W0 H H1 W2 P1 D0 d P t F P0 H1 P P1 H P1 d d P0 P2 F P0 P2 F Diagram 2: PCM 10/15 mm Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components Dimensions for Radial Taping Symbol PCM 2.5 taping PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping W 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.