User Manual

2 The WIMAN Command Line Level
31 / 90l
2.6.4 Statistics Instructions
The WIMAN radio modem collects statistics data and system in-
formation on both software and hardware as. In case of an error,
a very exact search for the cause of the error is possible with the
help of the statistics explained below.
The command Stat displays a list of the available statistics. The
display output appears as follows:
WIMAN_Star # stat
The following statistics are available:
serial - serial interface statistics
eth - ethernet interface statistics
fr - common frame relay information
fr<dlci> - traffic on frame relay <dlci>
frmap - show dlci switching map
wl - common wireless interface information
wl<n> - traffic on wireless interface node <n>
qos<n> - actual quality of services wireless interface <n>
ipif - IP interfaces
iproute - IP routing table
tp - transparent interface statistics
sync - RF and external synchronisation
hw - hardware statistics
sw - software statistics
update - software update statistics
sysmsg - system messages
syserr - system errors
date - actual date and time
Figure 8 the statistics assistance display
The instruction Stat <type> displays the statistics specified with
<type>. The following statistics can be selected:
• serial
supplies statistics of all serial interfaces
• fr
supplies general Frame Relay information
• fr<dlci>
supplies information of a certain Frame Relay channel
(DLCI)
• wl
supplies general information of the wireless interface
• wl<node>
supplies information about the data communication to a
certain WIMAN ACCESS selected with NodeId
• qos<n>
Quality of service. Supplies performance information about
the grade of transmission
Stat <type>
Stat