User Manual

AP-7
Cold Shoe Flash Adapter
Instructions continued on back >>
Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
About the AP-7
The AP-7 is a universal Flash Adapter which securely
holds most flashes, shoe cords or shoe adapters attached
to other devices.
Weight: .705 oz (adapter only)
Dimensions (Overall L x W x H): 1.8” x 0.75” x 0.55”
Materials: Anodized 6061 Aluminum, stainless steel, Nylon knob
Package Contents:
• Flash Adapter: AP-7 Universal Cold Shoe (Qty 1)
• Thumb Screw: 1/4-20 x 7/16” Length Thumbscrew (Qty 1)
• Hex Key: 3/32 (Qty 1)
Nylon Thumbscrew
A large durable Nylon thumbscrew
engages the Stainless Steel Clamp-
ing Pusher. It is captivated by the
Stainless Stud. Withstands extreme
abuse (tested)
The Wimberley
Cold Shoe
Mounting Thumbscrew
A 1/4-20 Stainless Steel screw with plastic knob is
included to allow attachment to 3rd Party Flash Brackets.
Stainless Pusher
The spring loaded pusher clamps
the foot in the cold shoe.
Mounting Hole
A standard female 1/4-20 thread is used to mount the cold shoe
onto your desired bracket, adapter or fastener.
Anti-Rotation Set Screw
This set screw is useful for more permanent
installations to keep the shoe from loosening or
becoming misaligned (use included hex key)
The screw has a nylon patch to prevent it from
inadvertently loosening.
Flash Contact Cutout
The clamp has a channel cut in the top face with
ample clearance to avoid contact with the flash
pins and clamp body
Slide the off-camera shoe cord or remote trigger equipped
flash into the Flash Adapter until it stops and tighten the
knob.
Made in USA