User Manual

The M-3 Tilt Arm is one of the components of the Wimberley
Modular Flash Bracket System. It is included in the following
combo units.
Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
About the M-3
Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
Weight: 3.5 oz
Dimensions (Overall L x W x H): 5.4 x 1.0 x 1.0 in
Materials: Anodized 6061 Aluminum, stainless steel fasteners
Package Contents:
• M-3 Module: Tilt Arm (Qty 1)
Instructions continued on back>>
Connecting Flash Bracket Modules:
knob
cylindrical nub
Unscrew the knob so that
the upright module can fit
between the cylindrical
nub and the knob base
Forked end of
module
Slip the forked end of the
module over the exposed
threads. Locate one of the
enlarged areas in the forked
end over the cylindrical nub.
Tighten the knob
securely.
Tip: if you find the metal knobs difficult
to grip, try wrapping several layers of
self-fusing rubber grip tape (3M 2155)
around the knob to cushion it and make it
easier to grip in the field.
Feel free to contact us
if you have any questions.
M-3
Tilt Arm
Flash Bracket Module
Made in USA