User Manual

Wimberley, Inc. Phone: [phone]
1750 Broadway St Toll Free: 1-888-665-2746 (USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com [e-mail]
Dimensions (coiled-up): (L x W x H): 9” x 8” x 1.5” in
Maximum extended length: 23 inches
Weight: 7.9 oz (224g)
Extending the reach of your Plamp II
If you need more reach one option is to attach the Plamp II to an object other than your own
tripod. Another option is to extend the length of your Plamp by adding extra links to its arm.
We sell a 12” long extension (part # PP-222). The trade-off to adding extra length to your Plamp
is that it becomes less rigid.
Package Contents: The Plamp II (Qty 1)
Tips and Tricks
PP-222
12” Plamp II Extension ($8.00)
5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
Reconnecting the ball-and-socket joints of your Plamp
If the articulating arm is bent forcefully beyond its normal range of motion, it is
possible for the segments to pop out of joint. Fixing this is simply a matter of
popping the segments back together. If you have a hard time reconnecting the
joints (we realize it takes quite a bit of force), you can warm the socket (female)
end in hot water (boiling or near-boiling). This will cause the socket to expand
and make it easier to pop the ball portion into place.
Camera Generated Vibrations
If your Plamp is secured to your cameras tripod, it is
possible for vibrations from mirror slap to travel through
the Plamp to your subject, negatively affecting image
sharpness. This issue is magnified when you add the
12” extension to the plamp.
We strongly advise using mirror lock-up
(if your camera has this feature)
Alternately, you can attach the Plamp II to an object not
connected to your camera such as our plamp stake
(part# PP-300) or a second tripod.
These vibrations are not a concern when
Holding objects that are not in the picture
(e.g. reflectors & diffusers).
Wimberley, Inc. ©2017, All Rights Reserved Rev. 170220
Arched Recess
reliably grip cylindrical
objects such as small
flashlights and branches.
Foam Jaw Inserts
Grip delicate objects without damage.
Thumbscrew Turn the thumbscrew to open or close the jaws of the clip.
Compared to typical spring-activated clips, thumbscrew activated clip jaws allow
for more finesse when holding delicate objects, as well as much higher maximum
clamping force when desired.
The Plamp Clip
Clip Body
The clip is custom designed to hold
anything from the most delicate plant stems
to heavy reflectors and diffusers. It is made of
nearly unbreakable ST Nylon
Jaw opening band
This elastomer band puts tension on the clamp’s moving
jaw so that it opens when you loosen the thumbscrew. It
is made of weather/UV resistant EPDM
Special notches in the clip’s jaws grab the steel rim on reflectors and
diffusers, providing a secure, slip-free attachment (applies to typical cloth
reflectors/diffusers with steel perimeter hoop). This new feature is a drastic
improvement over other clips currently on the market.
The firm grip allows you to make precise adjustments to the angle of a reflector.
You can even hold diffusers cantilevered straight out above your subject
Important Feature
Reflector/Diffuser Notches
PP-210
Plamp Rod Extension ($19.00)
Fine control using the Plamp Rod Extension
For extra dexterity try using the Plamp Rod Extension in con-
junction with the Ground Plamp or a Plamp II connected to a
tripod leg or Plamp Stake.
Rod Extension
Plamp II
Ground Plamp
Move desirable background or
foreground elements
into the picture.
Move distracting back-
ground or foreground
elements out of the way
Made in USA
®
The Plamp II PP-200