User's Manual

Replacing the Remote Control Battery
If the remote control stops working or works improperly, replace the battery (CR2025 lithium
battery) with a new one.
1. Pull out the battery holder.
2. Remove the old battery from the holder and then put a new battery with “+” facing up.
3. Insert the battery holder back to the remote control.
Warning
Battery may explode if mistreated. Do not recharge, disassemble
or dispose of in fire
Notes
 When the lithium battery becomes weak, the operating distance of the Remote Control
may shorten, or the Remote Control may not function properly. In this case, replace the
battery with a CR2025 lithium battery. Use of another battery may present a risk of fire
or explosion.
 Dispose the used batteries as specified by the local authorities.
 Do not leave the Remote Control in a very hot and humid place.
 Incorrect use of the battery may cause leaking and corrosion.
- When the Remote control will not be used for a long period of time, remove the
- Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it
into a fire may cause the battery to rupture and leak.
battery from the remote control to prevent leaking and corrosion.