Getting Started Guide

11
 Shortcut settings: You can set the navigation keys designated menu.
 Auto power on/off：Phone can power on/off according to your preset time.
 Restore factory settings: You can recover the phone into the initial settings with this function. The default password is: 1234.
14.2. Display settings
 Power on/off display: Set the power-On or power-Off animations.
 Wallpaper settings: Set an image as wallpaper.
 Idle display settings: On, it will be displayed in the standby interface.
 Contrast: Adjust the displaying contrast.
 Backlight: Set the backlight time.
 Keypad backlight time: Set the duration for keypad backlight.
14.3. Security settings
The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone
when leaving the factory is 1234.The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network
operator.
 PIN: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
 Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)
 Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each
power-on.
 Modify the cellphone password: You can change the phone password.
 Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.
 Auto keypad lock: Set to lock the keypad.
 Lock screen by end-key: Activate, in the idle mode, you can use the power-key to lock the screen.
 Fixed dialing: Add the numbers for fixed dialing.
 Blacklist: You can check the black list number in here and set the feature whether need to act on calling or messaging. If you added the current
contact to blacklist you will be not received the call or messages from this number.
 whitelist:You can view the white list number here and set whether this function needs to handle calls or messages. If you add the current contact
to the white list, you will not receive calls or messages other than the white list.
14.4. Call settings
 Call divert: Divert an incoming call to a designated phone number under the presetting condition. This function can be launched or closed.
 Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close