Installation Guide

2pcs

1pcs

4pcs

1pcs

4pcs

7pcs

8/8pcs

1pcs

2pcs

H I J

1pcs

4pcs

Wood floor

Cement floor

Need an electric drill

to drill 12mm hole

USER MANUAL

Step

Please put all parts on the ground.

First Step

Put Part #F into Part# A

Connect Part#B and Part#A (two) with Part l#G

Put Part#C and Part #D into holes of Part B

(Please pay attention to the direction of Part#D as shown in the figure)

First Step

Second Step

Connect Part #E (the short side) and Part #A with Part# G&I

Put the other side of Part C and Part D into holes of Part E

Connect Part E ( the long side) and Part A with Part G$I

Second Step

Third Step

Place the handrail on suitable stairs

Screw Part G by Part L

Third Step

Mark hole sites on stairs tracing four h

oles of Part A

Leave the handrail alone and drill dow

n according to the mark with a 12 MM driller

Align the handrail and holes，Knock nails （part K/J）into the ground with hammer

（Cement floor and marble floor，please using Part K；Timber floor，

please using Part J）

Forth Step

Tips：Avoiding mistakes，when processing the first and second step, we suggest do not connect parts tightly.