Use and Care Manual

Fine
Thick
Thick
Roller Assembly:Insert roller connector(A-2) into right roller (A-3), fasten it with bolt(S).
Link the left roller (A-1) to the connector（A-2), fasten it with bolt(S). Now you have a
full length roller.
Front bar assembly: Insert front bar connector (D-2) into right front bar (D-3), fasten with
bolt (S). Link left front bar (D-1) with the connector (D-2), fasten it with bolt (S).
Now you have a full length front bar
Unfold the pieces of awning fabric. You should have one large fabric piece(C) and
a valance with a scalloped edge. You should also have three fabric liner cords, two
thick and one thinner
A-1
D-1 D-2 D-3
A-2 A-3
S
S
C
U
T
T
E
S
S
Insert the part U and part T into both ends of part C and insert another part T into
the part E.
WARM NOTE: Please note when you install part U and T, you need to straighten
5-14
the part C and part E and then install part U and T. Best 2 people install