Use and Care Manual

Fine
Thick
Push the thin one end of fabric with liner inserted into gauges on roller,the put
the thick one end through front bar and put another thick one into valance.
Roll up the interfacing cloth
NOTE: You need to cut down the excess part T, when you install part H.
Insert the rotator (V,W) into the roller (A)
.
I
K
V
HR
R
H
W
I
K
6-14
Slide the part I and part K into the roller (D) (NOTE: When you install part K, you need
to first unscrew the screw nut and put it through the roller (D) and then to fix part K.)
Put both the left and right plastic covers (H) on each end of the roller (D) with part R