User's Manual

ManualsBrandsWinchance Solar Technology ManualsAudio EquipmentSolar Outdoor Wireless Speaker

Charging the solar speaker with your AC/DC adaptor.

Charging The Solar Speaker Using The Sun.

Place the solar speaker in direct sunlight for 15 hours to

charge the batteries.

PULL TAB

Owners Manual

REMOTE

CONTROL

Channel

MP3/

AUX IN

DC12V

SOLAR SPEAKER

DOCKING STATION

DOCKING STATION ADAPTORS

REMOTE CONTROL

POWER PORT

DC 5V

OFF

Solar panel may have protective film. THIS MUST BE REMOVED PRIOR TO USE.

BOTTOM OF SOLAR SPEAKER

BACK OF DOCKING STATION

Charging the docking station with your AC/DC adaptor.

30GB/60GB

TOUCH 8,16,32GB10GB/20GB

NANO

MINI

STEP 1

STEP 2

For first time use, remove pull tab from between the battery and its connector.

(See remote control instructions for battery replacement)

Charging your devices out of the box

For first time use allow both the speaker and the docking station to charge

for 4 full hours to ensure a complete charge

Solar Speaker Parts

Plug the docking station AC cable into the wall, next plug the opposite end into the DC portal

on the back of the docking station

. The iPod will only charge in the docking station pin when the

docking station is plugged into a AC outlet

Plug the solar speaker AC adaptor into the wall, next plug the opposite end into the DC portal

on the bottom of the solar speaker. When AC adapter is plugged in, red LED on speaker

bottom lights up.

AUXILIARY CABLE

AUDIO CABLE

MU-108

DOCKING STATION AC CABLE

Model No. : BI, BI07-050140-AdV for CE

BI, BI07-050140-AdU for FCC

Input: AC 100-240V～50/60Hz 0.5A

Output: DC 5V --- 1.4A

SOLAR SPEAKER AC CABLE

Model No. : BI, BI20-120150-AdV for CE

BI, BI20-120150-AdU for FCC

Input: AC 100-240V～50/60Hz 0.5A

Output: DC 12V --- 1.5A

Summary of content (5 pages)

PAGE 1
MU-108 Owners Manual STEP 2 Solar Speaker Parts A Charging your devices out of the box Charging the solar speaker with your AC/DC adaptor. REMOTE CONTROL POWER PORT 3/ MP IN AUX DC 12V DOCKING STATION BOTTOM OF SOLAR SPEAKER SOLAR SPEAKER Plug the solar speaker AC adaptor into the wall, next plug the opposite end into the DC portal on the bottom of the solar speaker. When AC adapter is plugged in, red LED on speaker bottom lights up. AUDIO CABLE DOCKING STATION AC CABLE Model No.
PAGE 2
STEP 2 Contd. page 2 BATTERY STATUS INDICATION SPEAKER: BATTERY STATUS INDICATION DOCKING STATION: • Green light indicates a battery capacity of 80%-100%. Red light indicates a battery capacity of less than 20%. • Yellow light indicates a battery capacity of 20%-80% Yellow light indicates a battery capacity of 20%-80%. • Red light indicates a battery capacity of less than 20% Green light indicates a battery capacity of 80%-100%. • Flashing red light indicates that the battery capacity exhausted.
PAGE 3
STEP 4 Contd. B page 3 Using the auxiliary cable provided, plug the straight end into the microphone jack of your iPod shuffle, MP3 player, or home audio system. Then plug the angled end of the auxiliary cabledirectly into the AUX port on the back of the docking station. Now turn on your iPod or MP3 player or home audio system. Turn the volume to an appropriate level for best performance.Now press play. DC 5V OFF 1 2 3 AUXILIARY PORTAL C Plug the straight end into the headphone jack on the iPod.
PAGE 4
Replacing the battery on your remote page 4 BACK OF REMOTE CONTROL RELEASE Gently pull in the release tab towards the battery tray as you pull the battery tray out. Remove the old battery and replace with a new CR2025 lithium battery (sold separately). Replace battery cover. BATTERY RY AT TE B M U LITHI R 2025 C 3V CHN RELEASE TAB NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. This device complies with Part 15 of the FCC Rules.
PAGE 5
Replacing the batteries in your solar speaker page 5 SCREWS BATTERY COVER 12V 3/ MP IN AUX DC BATTERY PACK O FF Channel 1 2 3 ON/OFF SWITCH Turn the ON/OFF switch to "OFF." Use a flat head screwdriver to remove the two screws holding the battery cover in place. Remove the old battery pack by carefully unplugging it from the bottom of the solar speaker. Replace with one new Ni-Mh 2000 mAh AA rechargeable battery pack (sold separately).