Instructions / Assembly

Removing the safe from the pallet 12
Attention!
The following is BEST performed with several individuals and is only
a suggested method. Winchester Safes will not be liable for any
accidents, damages or injuries that may occur.
Step 3
Using a 17 mm wrench, hold the bolt in
place on the bottom of the pallet. From
the inside of the safe, use a 16 mm
socket to remove the nut from the bolt,
from the remaining side of the skid.
Step 4
Slightly push upward on
the safe from the side
while somebody else
removes the other skid.
Step 5
Lower the safe to the
ground once the skid is
removed safely.