Specification

ManualsBrandsWinchester ManualsHeating, Ventilation, and Air Conditioning2.5 Ton 13 SEER Sweat Heat Pump System with 17.5 in. Coil and 30 ft. Line Set

TECHNICAL GUIDE

LX SERIES

SPLIT-SYSTEM HEAT PUMPS

13 SEER – R-410A – 1 PHASE

1.5 THRU 5 NOMINAL TONS

MODELS: THJD18 THRU 60

Due to continuous product improvement, specifications

are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.colemanac.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY SUMMARY*

Standard 5-Years limited parts warranty.

Standard 10-Years limited compressor warranty.

Extended 10-Years limited parts warranty when product is

registered online within 90 days of purchase for replacement

or closing for new home construction.

*Does not apply to R-22 models, 3-Phase models, or internet sales.

See Limited Warranty certificate in User's Information Manual for details.

571210-CTG-C-1012

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 13 SEER Series unit is the outdoor part of a versatile cli-

mate system. It i76s designed with a matching indoor coil com-

ponent from Johnson Controls Unitary Products. Available for

typical applications this climate system is supported with acces-

sories and documents to serve specific functions.

FEATURES

• Small Footprint - The compact footprint is a perfect fit for

any application.

• Quality Condenser Coils - The coil is constructed of copper

tubing and enhanced aluminum fins for increased perfor-

mance.

• Coil Protection - Coils are protected from damage by a slot-

ted, stamped steel coil guard.

• Protected Compressor - Compressors are protected inter-

nally by a high pressure relief valve and a temperature sen-

sor, and externally by the system high pressure switch. A

factory installed liquid line filter-drier further protects the com-

pressor against moisture and debris.

• Environmentally Friendly Refrigerant - The next genera-

tion refrigerant R-410A delivers environmentally friendly per-

formance with zero ozone depletion.

• Durable Finish - The cabinet is made of G90-equivalent pre-

painted steel, with special primer formulas and matte tita-

nium texture to insure less fading when exposed to sunlight.

The coated steel wire fan guard and pre-treated, galvanized

steel chassis components resist corrosion and rust creep.

• Lower Installed Cost - Installation time and costs are

reduced by easy power and control wiring connections. The

unit is factory charged for a 15-foot lineset. The small base

dimension means less space is required on the ground or

roof.

• Top Discharge - Warm air from the top mounted fan is blown

up, away from the structure and any landscaping. This allows

compact location on multi-unit applications.

• Low Operating Sound Level - The upward air flow carries

the normal operating noise away from the living area. The

rigid top panel effectively isolates any motor sound. Isolator

mounted compressor and the condenser coil muffle the nor-

mal fan motor and compressor operating sounds.

• Low Maintenance - Long life, permanently lubricated motor-

bearings need no annual servicing.

• Easy Service Access - Fully exposed refrigerant connec-

tions and a single panel covering the electrical controls make

for easy servicing of the unit.

• Secured Service Valves - Secured, re-usable service

valves are provided on both the liquid and vapor sweat con-

nections for ease of evacuating and charging.

• Agency Listed - Safety certified by CSA to UL 1995 / CSA

22.2. Performance certified to ANSI/AHRI Standard 210/240

in accordance with the Unitary Small Equipment certification

program.

Summary of content (44 pages)

PAGE 1
571210-CTG-C-1012 DESCRIPTION The 13 SEER Series unit is the outdoor part of a versatile climate system. It i76s designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications this climate system is supported with accessories and documents to serve specific functions. TECHNICAL GUIDE LX SERIES SPLIT-SYSTEM HEAT PUMPS 13 SEER – R-410A – 1 PHASE 1.
PAGE 2
571210-CTG-C-1012 Physical and Electrical Data THJD18 S41S3 MODEL THJD24 S41S4 THJD30 S41S4 Unit Supply Voltage THJD36 S41S4 THJD42 S41S4 THJD48 S41S4 THJD60 S41S5 208-230V, 1 60Hz Normal Voltage Range 1 187 to 252 Minimum Circuit Ampacity Max. Overcurrent Device Amps Min. Overcurrent Device Amps 11.9 11.2 14.1 19.7 20.9 25.6 42.6 20 15 20 30 35 45 70 2 3 Compressor Type 15 15 15 20 25 30 45 Scroll Recip Recip Recip Recip Recip Scroll Rated Load 9.0 8.3 10.
PAGE 3
571210-CTG-C-1012 System Charge for Various Matched Systems Outdoor Unit Required Orifice or TXV 1,2 THJD18S41S3 THJD24S41S4 THJD30S41S4 THJD36S41S4 THJD42S41S4 THJD48S41S4 THJD60S41S5 .051/4F1 .054, .059/4G1 .063/4G1 .071/4H1 .075/4H1 4J1 4K1 Additional Charge, Oz Indoor Unit 3,4,5 AHE18B .051/ TXV + 0 – – – – – – AHE24B – .054 / TXV + 0 – – – – – AHE30B – .054 / TXV + 0 .063 / TXV + 0 – – – – AHE36C – – .063 / TXV + 25 .071 / TXV + 0 – – – AHE42D – – – .071 / TXV + 16 – – – AHE48D – – – – .
PAGE 4
571210-CTG-C-1012 COOLING CAPACITY - With Air Handler Coils UNIT MODEL AIR HANDLER COIL MODEL1 MODEL WIDTH AHE18B 17.5 – AHR18B 17.5 – AHV18B 17.5 COOLING RATED CFM NET MBH SEER EER 14.6 14.00 12.00 14.9 13.00 11.00 18.0 13.2 14.00 12.00 TOTAL SENS. 610 18.0 665 18.0 – 615 13 SEER HP WITH AIR HANDLERS THJD18S41S3 THJD24S41S4 THJD30S41S4 THJD36S41S4 AV*24 17.5 – 610 18.0 13.7 14.50 12.00 MV12B 17.5 FC/MC18B 600 18.0 13.7 14.50 12.00 MV12B 17.
PAGE 5
71210-CTG-C-1012 COOLING CAPACITY - With Air Handler Coils (Continued) UNIT MODEL AIR HANDLER COIL MODEL1 MODEL WIDTH AHE48D 24.5 – AHR48D 24.5 – AHV48D 24.5 AV*48 24.5 COOLING RATED CFM NET MBH SEER EER 33.2 14.00 12.00 29.6 13.00 11.00 39.5 30.2 13.75 11.50 1385 42.0 32.6 14.50 12.00 12.00 TOTAL SENS. 1385 40.5 1320 39.5 – 1300 – 13 SEER HP WITH AIR HANDLERS THJD42S41S4 THJD48S41S4 THJD60S41S5 AV*60 24.5 – 1360 42.0 32.6 14.50 MV16C 21.
PAGE 6
571210-CTG-C-1012 COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings) COIL UNIT MODEL COOLING CFM RANGE (Min.-max.) RATED CFM NET MBH SEER1 EER 14.0 13.00 11.00 14.0 13.50 11.00 18.0 13.7 13.00 11.00 600 18.0 13.8 13.05 11.00 450 - 750 600 18.0 13.8 13.05 11.00 14.5 600 - 1000 800 23.8 17.1 13.00 11.00 FC/MC/PC35 17.5,21.0 600 - 1000 800 23.6 17.1 13.00 11.00 FC/MC/PC37 14.5 600 - 1000 800 24.0 17.3 13.00 11.
PAGE 7
571210-CTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 THJD18S41S3 T*(8,L)X*A12 14.5 UC24B 570 18.0 14.1 14.50 12.00 T*(8,L)X*A12 14.5 UC30B 570 18.0 14.1 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC18B 580 18.0 14.6 14.00 12.00 T*(8,L)X*B12 17.5 FC/MC/PC24B 620 18.0 14.9 14.00 12.00 T*(8,L)X*B12 17.
PAGE 8
571210-CTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 THJD24S41S4 T*(8,L)V*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00 T*(8,L)V*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.
PAGE 9
571210-CTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 THJD30S41S4 THJD36S41S4 T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.
PAGE 10
571210-CTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 THJD36S41S4 T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00 T*(8,L)V*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00 T*(8,L)X*A12 14.5 FC/MC/PC37A 1290 36.0 27.6 14.50 12.00 T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 36.0 27.6 14.50 12.
PAGE 11
571210-CTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 12.00 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 THJD42S41S4 THJD48S41S4 T*(8,L)V*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 T*(8,L)V*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50 T*(8,L)V*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00 T*(8,L)V*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.
PAGE 12
571210-CTG-C-1012 COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) FURNACE UNIT MODEL MODEL COOLING WIDTH COIL MODEL1 RATED CFM Net MBH TOTAL SENS. SEER EER 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES2 THJD48S41S4 THJD60S41S5 T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00 T*9(C,V)*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00 T*9(C,V)*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00 T*9X*C16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.
PAGE 13
571210-CTG-C-1012 HEATING CAPACITY - With Air Handler UNIT MODEL AIR HANDLER HEATING2 COIL1 MODEL 47 F MBH COP 17 F HSPF KW MBH COP KW STD 13 SEER HP WITH AIR HANDLERS THJD18S41S3 THJD24S41S4 THJD30S41S4 THJD36S41S4 AHE18B – 18.0 3.70 1.43 11.1 2.28 1.43 7.70 AHR18B – 18.0 3.54 1.49 11.4 2.22 1.50 7.70 AHV18B – 18.0 3.50 1.51 11.1 2.22 1.46 8.00 AV*24 – 18.0 3.66 1.36 9.9 2.78 1.06 8.20 MV12B FC/MC18B 18.0 3.58 1.39 8.6 2.52 1.24 7.
PAGE 14
571210-CTG-C-1012 HEATING CAPACITY - With Air Handler (Continued) UNIT MODEL AIR HANDLER HEATING2 COIL1 MODEL 47 F MBH COP 17 F HSPF KW MBH COP KW STD 13 SEER HP WITH AIR HANDLERS THJD42S41S4 THJD48S41S4 THJD60S41S5 AHE48D – 39.0 3.90 3.00 21.8 2.64 2.52 8.20 AHR48D – 40.0 3.66 3.20 22.4 2.48 2.65 7.70 AHV48D – 39.5 3.86 3.00 21.0 2.54 2.42 8.20 AV*48 – 39.5 3.96 2.92 22.2 2.68 2.43 8.20 AV*60 – 39.5 3.98 2.91 22.2 2.70 2.41 8.
PAGE 15
571210-CTG-C-1012 HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings) UNIT MODEL HEATING2 COIL1 MODEL 47 F MBH COP 17 F KW HSPF MBH COP KW STD 13 SEER HP COIL ONLY RATINGS THJD18S41S3 THJD24S41S4 THJD30S41S4 THJD36S41S4 THJD42S41S4 THJD48S41S4 THJD60S41S5 FC/MC/PC18 18.0 3.36 1.50 12.7 2.16 1.24 8.20 FC/MC/PC24 18.0 3.36 1.45 10.4 2.60 1.17 8.20 FC/MC/PC30 18.0 3.42 1.54 11.4 2.18 1.53 7.75 UC24 18.0 3.42 1.54 11.4 2.
PAGE 16
571210-CTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces MODEL THJD18S41S3 FURNACE MODEL T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*B12 T*9V*A10 T*9V*A10 T*9V*A10 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*B12
PAGE 17
571210-CTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL THJD18S41S3 THJD24S41S4 FURNACE MODEL C*(8,L)C*B12 C*(8,L)C*B12 C*9C*B12 C*9C*B12 C*9C*B12 C*9C*B12 C*9C*B12 C*9C*B12 T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9V*A10 T*9V*A10 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V
PAGE 18
571210-CTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL THJD30S41S4 THJD36S41S4 FURNACE MODEL T*(8,L)V*A12 T*(8,L)V*A12 T*(8,L)V*B12 T*(8,L)V*B12 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*A12 T*(8,L)X*A12 T*(8,L)X*B12 T*(8,L)X*B12 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*B12 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9X*B12 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 C*(8,L)C*A12 C*(8,L)C*A12 C*(8,L)C*B12
PAGE 19
571210-CTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL THJD36S41S4 THJD42S41S4 FURNACE MODEL T*(8,L)X*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*B12 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*B12 T*9X*C16 T*9X*C16 T*9X*C16 T*9X*C20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 C*(8,L)C*A12 C*(8,L)C*B12 C*(8,L)C*C16 C*(8,L)C*C16 C*(8,L)C*C16 C*(8,L)C*C20 C*(8,L)C*C20 C*(8,L)C*C20 C*9C*B12 C*9C*C16 C*9C*C16 C*9C*C16 C
PAGE 20
571210-CTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL THJD42S41S4 THJD48S41S4 FURNACE MODEL T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 C*(8,L)C*C16 C*(8,L)C*C16 C*(8,L)C*C20 C*(8,L)C*C20 C*9C*C16 C*9C*C16 C*9C*C20 C*9C*C20 C*9C*D20 C*9C*D20 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C16 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C16 T*(8,L)X*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C16 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*
PAGE 21
571210-CTG-C-1012 HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) MODEL THJD48S41S4 THJD60S41S5 FURNACE MODEL C*9C*C20 C*9C*C20 C*9C*C20 C*9C*D20 C*9C*D20 C*9C*D20 T*(8,L)V*C20 T*(8,L)V*C20 T*(8,L)X*C20 T*(8,L)X*C20 T*9(C,V)*C20 T*9(C,V)*C20 T*9(C,V)*D20 T*9(C,V)*D20 T*9X*C20 T*9X*C20 T*9X*D20 T*9X*D20 C*(8,L)C*C20 C*(8,L)C*C20 C*9C*C20 C*9C*C20 C*9C*D20 C*9C*D20 COIL1 MODEL HEATING2 MBH 17 F COP KW HSPF STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES3 FC/MC62D 45.5 3.56 3.
PAGE 22
571210-CTG-C-1012 ACCESSORIES Compressor Blanket - Designed to further reduce the normal operating sound. Refer to Price Manual for specific model numbers. Start Assist Kit (S1-2SA067*) - May be required on 24, 30, 36, & 42 models when a TXV is installed. May also be required on 18 & 60 models in low voltage application. The 48 model has factory installed start assist. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
PAGE 23
571210-CTG-C-1012 TYPICAL INSTALLATION MINIMUM 18” SERVICE ACCESS CLEARANCE ON ONE SIDE 60” OVERHEAD CLEARANCE THERMOSTAT WEATHERPROOF DISCONNECT SWITCH NEC CLASS 1 WIRING NEC CLASS 2 WIRING 10” CLEARANCE AROUND PERIMETER TO FURNACE OR AIR HANDLER TERMINAL BLOCK TO INDOOR COIL NOTES: ALL OUTDOOR WIRING MUST BE WEATHERPROOF. MINIMUM 24” UNIT TO UNIT CLEARANCE.
PAGE 24
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD18S41S3 INDOOR COIL MODEL NO. FC35 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 450 600 750 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 16.8 18.5 18.8 20.3 21.7 18.9 19.4 19.9 21.3 22.3 21.0 20.3 20.9 22.2 22.9 S.C. 16.8 15.4 13.3 13.2 11.1 18.9 18.2 15.6 15.1 12.0 21.0 20.
PAGE 25
571210-CTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*A12 FC/MC/PC18A 0.99 0.98 0.93 T*9(C,V)*B12 UC18B 1.00 0.99 0.92 T*(8,L)V*A12 FC/MC/PC24A 1.02 1.06 0.93 T*9(C,V)*B12 UC24B 1.02 1.01 0.92 T*(8,L)V*A12 FC/MC/PC30A 1.02 1.06 0.93 T*9(C,V)*B12 UC30B 1.02 1.01 0.92 T*(8,L)V*A12 UC18A 0.99 0.99 0.93 T*9X*A10 FC/MC/PC18A 0.99 0.98 0.94 T*(8,L)V*A12 UC24A 1.02 1.05 0.93 T*9X*A10 FC/MC/PC24A 1.01 1.01 0.
PAGE 26
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD24S41S4 INDOOR COIL MODEL NO. AHP30 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 600 800 1000 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 22.6 25.9 25.9 28.3 29.4 25.2 27.1 26.8 29.2 30.4 27.9 28.3 27.6 30.0 31.4 S.C. 22.6 20.9 18.1 18.1 15.5 25.2 23.9 19.7 19.5 16.1 27.
PAGE 27
571210-CTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*A12 FC/MC/PC32A 1.02 0.99 0.94 T*9(C,V)*C20 FC/MC/PC43C 1.07 1.11 0.96 T*(8,L)V*A12 FC/MC/PC37A 1.06 1.04 0.94 T*9X*A10 FC/MC/PC32A 1.02 0.99 0.96 T*(8,L)V*B12 FC/MC/PC35B 1.05 1.02 0.94 T*9X*A10 FC/MC/PC37A 1.02 0.99 0.96 T*(8,L)V*B12 FC/MC/PC43B 1.06 1.04 0.94 T*9X*B12 FC/MC/PC35B 1.05 1.03 0.92 T*(8,L)V*C16 FC/MC/PC35C 1.05 1.03 0.93 T*9X*B12 FC/MC/PC43B 1.07 1.
PAGE 28
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD30S41S4 INDOOR COIL MODEL NO. AHP30 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 800 1000 1200 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 29.1 31.3 31.4 34.3 36.1 31.0 32.7 32.8 35.2 36.6 33.0 34.1 34.1 36.1 37.2 S.C. 28.0 24.7 21.2 21.0 17.8 29.9 27.9 23.3 22.4 18.2 31.
PAGE 29
571210-CTG-C-1012 Furnaces Coils T.C. S.C KW Furnaces Coils T.C. S.C KW T*(8,L)V*A12 FC/MC/PC32A 1.01 1.05 0.99 T*9(C,V)*C20 FC/MC/PC43C 1.04 1.09 0.93 T*(8,L)V*A12 FC/MC/PC37A 1.02 1.06 0.95 T*9X*B12 FC/MC/PC35B 1.03 1.12 0.94 T*(8,L)V*B12 FC/MC/PC35B 1.02 1.06 0.95 T*9X*B12 FC/MC/PC43B 1.05 1.15 0.94 T*(8,L)V*B12 FC/MC/PC43B 1.04 1.09 0.96 T*9X*C16 FC/MC/PC35C 1.04 1.12 0.93 T*(8,L)V*C16 FC/MC/PC35C 1.02 1.07 0.93 T*9X*C16 FC/MC/PC43C 1.05 1.13 0.
PAGE 30
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD36S41S4 INDOOR COIL MODEL NO. AHP36 CONDENSING ENTERING AIR TEMPERATURE 65 75 85 95 105 115 125 IDCFM 1000 1200 1400 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 80 72 T.C. 35.0 39.8 39.9 42.7 45.2 37.7 40.6 41.0 43.5 45.7 40.5 41.5 42.0 44.4 46.1 S.C. 34.9 32.4 27.9 27.1 22.7 37.7 35.4 29.9 28.6 23.2 40.
PAGE 31
571210-CTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*A12 FC/MC/PC37A 1.03 1.03 1.00 T*9X*C16 FC/MC/PC43C 1.05 1.07 0.97 T*(8,L)V*B12 FC/MC/PC43B 1.04 1.06 1.01 T*9X*C16 FC/MC/PC48C 1.06 1.09 0.96 T*(8,L)V*C16 FC/MC/PC43C 1.04 1.04 0.96 T*9X*C16 UC48C 1.07 1.09 0.97 T*(8,L)V*C16 FC/MC/PC48C 1.05 1.05 0.96 T*9X*C20 FC/MC/PC43C 1.05 1.04 0.96 T*(8,L)V*C16 UC48C 1.05 1.05 0.96 T*9X*C20 FC/MC/PC48C 1.05 1.05 0.
PAGE 32
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD42S41S4 INDOOR COIL MODEL NO. AHP48 IDCFM CONDENSING ENTERING AIR TEMPERATURE 1200 1400 1600 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 42.5 44.2 45.0 49.4 52.7 44.4 45.8 46.4 50.5 53.5 46.4 47.4 47.7 51.5 54.4 S.C. 42.5 38.4 32.9 32.8 26.7 44.4 42.2 35.3 34.7 27.6 46.4 46.0 37.6 36.7 28.6 KW 2.
PAGE 33
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD48S41S4 INDOOR COIL MODEL NO. AHP48 CONDENSING ENTERING AIR TEMPERATURE IDCFM 1510 1710 1910 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 47.6 50.1 49.8 54.1 60.7 49.4 50.8 51.0 55.8 61.9 51.2 51.5 52.2 57.5 63.1 65 75 85 95 105 115 125 80 S.C. 47.6 44.7 37.8 37.0 30.4 49.4 48.3 39.9 39.3 31.5 51.
PAGE 34
571210-CTG-C-1012 Furnaces Coils T.C. S.C. KW Furnaces Coils T.C. S.C. KW T*(8,L)V*C16 FC/MC62D 0.99 0.99 0.95 T*9X*C16 UC60C 0.98 0.96 0.94 T*(8,L)V*C16 FC/PC60C 0.98 0.98 0.96 T*9X*C20 FC/MC62D 1.00 0.99 0.94 T*(8,L)V*C16 UC60C 0.98 0.95 0.96 T*9X*C20 FC/PC60C 0.99 0.99 0.94 T*(8,L)V*C20 FC/MC62D 1.00 0.99 0.95 T*9X*C20 UC60C 0.99 0.96 0.94 T*(8,L)V*C20 FC/PC60C 0.99 0.98 0.96 T*9X*D20 FC/MC/PC60D 1.00 0.96 0.90 T*(8,L)V*C20 UC60C 0.98 0.
PAGE 35
571210-CTG-C-1012 COOLING PERFORMANCE DATA CONDENSING UNIT MODEL NO. THJD60S41S5 INDOOR COIL MODEL NO. AHX60 CONDENSING ENTERING AIR TEMPERATURE IDCFM 1800 2000 2200 ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 57.5 60.5 60.5 66.0 72.0 59.4 61.6 61.6 67.1 73.0 61.2 62.7 62.6 68.2 74.0 S.C. 57.1 52.5 44.9 44.2 35.6 58.9 55.6 46.8 46.2 36.7 60.8 58.6 48.8 48.2 37.7 KW 3.
PAGE 36
571210-CTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT THJD18S41S3 FC35 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 21.1 4.1 1.50 22.2 4.5 1.44 23.3 4.9 1.39 70 20.5 3.6 1.65 21.6 4.0 1.59 22.6 4.3 1.53 80 19.9 3.2 1.81 20.9 3.5 1.74 21.9 3.9 1.66 60 18.6 3.8 1.45 19.2 4.0 1.41 19.8 4.2 1.38 70 17.7 3.3 1.60 18.4 3.5 1.55 19.1 3.7 1.51 80 16.
PAGE 37
571210-CTG-C-1012 Furnaces Coils MBH COP KW Furnaces Coils MBH COP KW T*(8,L)V*A12 FC/MC/PC18A 1.03 0.99 1.04 T*9(C,V)*B12 UC18B 1.04 1.02 1.01 T*(8,L)V*A12 FC/MC/PC24A 1.04 1.06 0.98 T*9(C,V)*B12 UC24B 1.03 1.05 0.99 T*(8,L)V*A12 FC/MC/PC30A 1.04 1.06 0.98 T*9(C,V)*B12 UC30B 1.03 1.05 0.99 T*(8,L)V*A12 UC18A 1.04 1.02 1.02 T*9X*A10 FC/MC/PC18A 1.03 0.99 1.04 T*(8,L)V*A12 UC24A 1.04 1.06 0.98 T*9X*A10 FC/MC/PC24A 1.04 1.03 1.
PAGE 38
571210-CTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT 60 47 40 30 17 10 AIR TEMP. ENTERING INDOOR COIL 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 THJD24S41S4 AHP30 600 COP 3.8 3.5 3.3 3.6 3.4 3.1 3.5 3.2 3.0 3.1 2.8 2.6 2.5 2.4 2.2 2.4 2.0 1.7 MBH 28.3 27.5 26.7 24.9 23.8 22.7 23.1 21.9 20.7 19.0 17.7 16.4 13.8 13.3 12.5 12.7 11.1 9.4 KW 2.20 2.27 2.35 2.03 2.08 2.14 1.94 1.98 2.03 1.79 1.83 1.87 1.64 1.65 1.68 1.
PAGE 39
571210-CTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT 60 47 40 30 17 10 AIR TEMP. ENTERING INDOOR COIL 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 THJD30S41S4 AHP30 800 COP 3.7 3.5 3.3 3.6 3.4 3.1 3.5 3.2 3.0 3.3 2.9 2.6 2.6 2.3 1.9 2.2 1.9 1.6 MBH 32.2 31.6 30.9 28.9 27.9 26.9 26.7 25.6 24.4 23.2 21.3 19.4 17.3 15.4 12.7 14.2 12.1 9.9 KW 2.52 2.64 2.77 2.35 2.43 2.51 2.25 2.32 2.39 2.08 2.16 2.23 1.92 1.97 2.00 1.
PAGE 40
571210-CTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT THJD36S41S4 AHP36 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 38.0 3.7 3.01 37.2 3.6 3.00 36.4 3.6 2.98 70 37.5 3.5 3.18 36.9 3.4 3.17 36.4 3.4 3.15 80 37.0 3.2 3.34 36.7 3.2 3.33 36.4 3.2 3.32 60 34.7 3.5 2.87 34.0 3.5 2.87 33.3 3.4 2.86 70 34.1 3.3 3.01 33.7 3.3 2.99 33.3 3.3 3.00 80 33.
PAGE 41
571210-CTG-C-1012 Furnaces Coils MBH COP KW Furnaces Coils MBH COP KW T*(8,L)V*A12 FC/MC/PC37A 0.93 0.98 0.95 T*9X*C16 FC/MC/PC43C 0.92 1.02 0.90 T*(8,L)V*B12 FC/MC/PC43B 0.93 0.98 0.95 T*9X*C16 FC/MC/PC48C 0.93 1.03 0.90 T*(8,L)V*C16 FC/MC/PC43C 0.92 1.01 0.91 T*9X*C16 UC48C 0.94 1.06 0.88 T*(8,L)V*C16 FC/MC/PC48C 0.91 1.02 0.90 T*9X*C20 FC/MC/PC43C 0.92 1.02 0.90 T*(8,L)V*C16 UC48C 0.93 1.05 0.89 T*9X*C20 FC/MC/PC48C 0.91 1.02 0.
PAGE 42
571210-CTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT THJD42S41S4 AHP48 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 45.9 4.2 3.23 45.2 4.1 3.20 44.6 4.1 3.18 70 44.7 3.8 3.42 44.5 3.8 3.40 44.4 3.8 3.39 80 43.5 3.5 3.61 43.8 3.6 3.60 44.1 3.6 3.58 60 41.8 4.2 2.92 41.5 4.0 3.07 41.2 3.7 3.22 70 40.8 3.9 3.09 40.3 3.7 3.19 39.8 3.5 3.35 80 39.
PAGE 43
571210-CTG-C-1012 HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT 60 47 40 30 17 10 AIR TEMP. ENTERING INDOOR COIL 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 60 70 80 THJD48S41S4 AHP48 1400 COP 3.7 3.5 3.3 3.6 3.7 3.7 3.5 3.3 3.0 3.1 2.9 2.8 2.8 2.7 2.4 2.6 2.3 2.1 MBH 53.4 51.9 50.4 46.3 46.5 46.7 42.6 39.8 37.0 32.1 31.7 31.4 27.2 26.6 24.2 23.1 21.7 20.3 KW 4.17 4.32 4.45 3.75 3.71 3.68 3.52 3.57 3.63 3.04 3.16 3.29 2.82 2.89 2.96 2.
PAGE 44
HEATING PERFORMANCE DATA CONDENSING UNIT MODEL NO EVAPORATOR COIL MODEL NO AIR TEMP. ENTERING OUTDOOR UNIT THJD60S41S5 FC/MC62 ID CFM AIR TEMP. ENTERING INDOOR COIL MBH COP KW MBH COP KW MBH COP KW 60 72.1 3.8 5.62 71.1 3.8 5.53 70.1 3.8 5.42 70 70.9 3.4 6.11 70.6 3.4 6.02 70.3 3.5 5.90 80 69.8 3.1 6.62 70.2 3.2 6.50 70.5 3.2 6.40 60 62.7 3.7 4.99 62.4 3.7 4.95 62.1 3.7 4.90 70 61.1 3.3 5.43 61.1 3.5 5.09 61.1 3.8 4.76 80 59.6 3.0 5.86 59.