User guide

ManualsBrandsWinco Mfg. ManualsFurniture3740 - PRIVESS MODULAR 4 Panel Privacy Screen

PLEASE DO NOT DISCARD THIS MANUAL! KEEP FOR FUTURE REFERENCE AND TRAINING

1. READ AND FOLLOW ALL DIRECTIONS.

2. SAVE THESE INSTRUCTIONS for future reference and training.

3. NEVER place screen on a cart, table, stand or other object; Screen

could fall and INJURY MAY OCCUR.

4. NEVER place screen near open flame or over a radiator or heat

5. NEVER place screen in front of a door or exit sign; During

emergency, screen could hinder evacuation.

6. NEVER stand or ride on screen legs; INJURY MAY OCCUR.

7. DO NOT allow children to play with screen; Screen could fall and

INJURY MAY OCCUR.

8. DO NOT attach object to screen frame; Screen can tip over and

INJURY MAY OCCUR.

9. SUFFOCATION DANGER to children if vinyl is not attached to

screen. VINYL SCREEN IS NOT A TOY.

10. Screen should ALWAYS be positioned on level surface.

11. Remove from service, any screen with broken or missing parts, torn

vinyl, or other visible damage.

12. Screen is not intended for use in wet environments.

13. Screen is not recommended for outdoor use.

Screen Model: 373-374

Flat Panel Aluminum Folding Screen

PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS

BEFORE USING THIS PRODUCT.

If you have trouble understanding these instructions contact your dealer or

Winco customer support, (800) 237-3377 before attempting to use this product;

otherwise injury may occur.

Winco assumes no responsibility for damage or injury caused by

improper assembly, installation, use, or maintenance of these products.

Summary of content (8 pages)

PAGE 1
Screen Model: 373-374 Flat Panel Aluminum Folding Screen PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377 before attempting to use this product; otherwise injury may occur. Winco assumes no responsibility for damage or injury caused by improper assembly, installation, use, or maintenance of these products. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
PAGE 2
Hardware Included [A] Leg x 4 ea. [B] Leg x 2 ea. (model 373) x 4 ea. (model 374) (Actual size) 2” Carriage Bolt x 2 (Actual size) 1¼” Carriage Bolt x 2 (model 373) x 4 (model 374) Nylon Lock Wing-nut x 4 (model 373) x 6 (model 374) Plastic Screen Hinge x 2 (EXTRA for future screen attachment) Assembly Instructions No Tools Necessary 1. Identify the legs and their hardware to attach. (FIG.
PAGE 3
2. Stand the screen upside down. (FIG.2) 3. You will be installing the legs in the following order: Model 373: A-Leg, B-Leg, A-Leg (FIG.3-1) Model 374: A-Leg, B-Leg, A-Leg, B-Leg (FIG.3-1) A B A B LEG LEG LEG LEG IMPORTANT: Notice that the A-legs are installed, positioned differently than the B-legs (FIG.
PAGE 4
. Starting with either end of the screen panel install a pair of A-LEGS using (1) 2” CARRIAGE BOLT and (1) NYLON-LOCK WING-NUT. (FIG.4-1 & 4-2) 5. Next, on the adjacent panel, install a pair of B-LEGS (notched) using (2) 1¼” CARRIAGE BOLTS and (2) NYLON-LOCK WING-NUTS. (FIG.5-1, 5-2) NOTE: CARRIAGE BOLT must go through the square hole of the B-Leg 1st. (FIG.
PAGE 5
6. Next, on the adjacent panel, install a pair of A-LEGS using (1) 2” CARRIAGE BOLT and (1) NYLON-LOCK WING-NUT. (FIG.4-1, 4-2) 7. For model 374 ONLY: On the adjacent panel, install another pair of B-LEGS using (2) 1¼” CARRIAGE BOLTS and (2) NYLON-LOCK WING-NUTS. (FIG.5-1, 5-2, 5-3) 8. Stand Screen right-side up. Assembly Completed NOTE: (2) Extra hinges are provided to attach future screen panels.
PAGE 6
To eliminate gaps between screen panels (FIG.7-1), rotate the screen hinge towards you. (FIG.7-2) GAP To attach 2 screen panels together, line up a panel with the PLASTIC SCREEN HINGE (FIG.8-1) and squeeze until the panel pops into place. (FIG.
PAGE 7
Other Quality Winco Medical Furnishings You May Be Interested In: Visit us online at www.wincomfg.
PAGE 8
Design, appearance, parts, & construction are subject to change without notice 006333 REV.