Product Manual

ManualsBrandsWinco ManualsAccessoriesOxygen Tank Holder

Page 1 of 5

006321 REV. B Date 09-07-11 JWC

TO REDUCE THE RISK OF INJURY TO PERSONS:

1. READ AND FOLLOW ALL DIRECTIONS.

2. DO NOT use the IV pole for pulling, moving, or holding the chair in place.

3. DO NOT use this attachment in any location or on products other than those listed in these

instructions.

4. DO NOT make any modifications to the bracket or pole.

5. IV Pole and included bracket are designed for hanging IV solutions ONLY.

6. Immediately remove from service; Any chair with mechanical or visible damage.

7. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.

8. SAVE THESE INSTRUCTIONS for future reference and training.

5516 Southwest 1

Lane

Ocala, FL 34474

1-800-237-3377 / 352-854-2929 / Fax: 352-854-9544

e-mail: customerservice@wincomfg.com

Visit us on the web: www.wincomfg.com

Oxygen Tank Holder

Assembly Kits

For Models: 5400, 5570, 5580, 6550-6551, 6570-6571, 6700, 6940, 6950,

6980, 6988, 6990, 6998

CUSTOMER INSTRUCTIONS

PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377

before attempting to use this product; otherwise injury may occur.

Winco assumes no responsibility for damage or injury caused by improper assembly,

installation, use, or maintenance of these products.

PLEASE READ AND FAMILIARIZE YOURSELF WITH

LL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY

Summary of content (5 pages)

PAGE 1
Page 1 of 5 Oxygen Tank Holder Assembly Kits For Models: 5400, 5570, 5580, 6550-6551, 6570-6571, 6700, 6940, 6950, 6980, 6988, 6990, 6998 CUSTOMER INSTRUCTIONS PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377 before attempting to use this product; otherwise injury may occur.
PAGE 2
Page 2 of 5 ●O2 Holder Assembly (Kit # 250030): 5400-5570-5580-6700 ●Parts Included: Description: Qty. Part Number WELDED, OXYGEN TANK HOLDER O2 MOUNTING BRACKET (540 STYLE) STAR KNOB, MODIFIED, O2 HOLDER 1 1 1 250015 250035 201215 ●Tools needed: • • Phillips-Head Screwdriver Power tools are NOT recommended ●Assembly Instructions 1. Locate the rear-right side of the chair. (FIG. 1) NOTE: Left & Right is determined – as if sitting in the chair 2.
PAGE 3
Page 3 of 5 ●O2 Holder Assembly: 6550-6551-(Kit # 227615K), 6570-6571-(Kit # 227617K) ●Parts Included: Description: Qty. Part Number O2 U-BRACKET OXYGEN TANK HOLDER IV SPACER (655 model ONLY) 1” GRAY SQUARE CAP STAR KNOB 1/4-20 x 2 3/4" PHILLIPS-HEAD SCREW 1/4-20 NYLON LOCKNUT 1 1 1 2 1 2 2 227615 250015 227607 700700 201215 566571 566204 ●Tools needed: • • • Phillips Head Screwdriver 7/16” wrench (multiple size wrench included) Powered tools NOT recommended – FIG. 1 ●Assembly Instructions 1.
PAGE 4
Page 4 of 5 ●O2 Holder Assembly (Kit # 250010): 6940-6950 ●Parts Included: Description: Qty. Part Number WELDED, OXYGEN TANK HOLDER O2 MOUNTING BRACKET STAR KNOB, MODIFIED, O2 HOLDER 1 1 1 250015 227613 201215 ●Tools needed: • • • ½” Wrench 3/16” Allen Wrench Power tools are NOT recommended ●Assembly Instructions 1. Locate the rear-right side of the chair. (FIG. 1) FIG. 2 FIG. 1 NOTE: Left & Right is determined – as if sitting in the chair FIG. 3 FIG. 3A 2.
PAGE 5
Page 5 of 5 ●O2 Holder Assembly (Kit # 250040): 6980-6988-6990-6998 ●Parts Included: Description: WELDED, OXYGEN TANK HOLDER, BLACK O2 MOUNTING BRACKET, BLACK STAR KNOB, MODIFIED, O2 HOLDER 1/4-20 X 3/4 PHILLIPS-HEAD SCREW Qty. 1 1 1 2 Part Number 250015B 227613B 201215 566504 ●Tools needed: • • Phillips-Head Screwdriver Power tools are NOT recommended ●Assembly Instructions 6. Locate the rear-right side of the chair. (FIG. 1) NOTE Left & Right is determined – as if sitting in the chair 7. Use (FIG.