Product Manual

Page 2 of 5
006321 REV. B Date 09-07-11 JWC
●O
2
Holder Assembly (Kit # 250030): 5400-5570-5580-6700
●Tools needed:
• Phillips-Head Screwdriver
• Power tools are NOT recommended
●Assembly Instructions
1. Locate the rear-right side of the chair. (FIG. 1)
2. Using a Phillips-head screwdriver remove the 2 screws
from the rear brace. (FIG.1)
3. Line up the “O2 Mounting Bracket” with the holes in the
rear brace.
Be sure the notch in the mounting bracket is facing up. (FIG.3)
4. Re-intall the screws removed in STEP 2 and tighten to a snug
Fit. (FIG.2)
5. Insert O
2
holder into bracket until the silver snap-button
sits in the notch of the bracket. (FIG.4)
NOTE:
Left & Right is determined – as if sitting in the chair
FIG. 1
FIG. 2
FIG. 3
●Parts Included:
Description: Qty. Part Number
WELDED, OXYGEN TANK HOLDER 1 250015
O2 MOUNTING BRACKET (540 STYLE) 1 250035
STAR KNOB, MODIFIED, O2 HOLDER 1 201215
FIG. 4