User manual

Construction of the resistive Touch Screen:
How to Operate
Touching the touch screen has the same effect as clicking the left mouse
button. You only need to apply a little pressure with the fingertip. In this re-
sistive process not only fingertip contact is recognized. The screen does
react in any way if touched, for example, with a stylus. The recommended
material for a stylus is polyacetal. The stylus should have a minimum
spherical radius of 0.8 mm and contain no sharp edges or burrs that may
cause damage to the topsheet.
You can adjust the brightness and the loudness with the thumb wheels
located down to the right of the front of the screen.
Hard-coated polyester topsheet
Adhesive
Glass substrate with spacer dots
GB - 21