User guide

Connection Bezel
The following sockets are located under the bezel of the screen:
USB- A For external peripherals, can be used for MSR
PoweredUSB
Data transfer and/or current supply for the screen via system e.g.
BEETLE
Power Supply Current supply for the screen via external power pack (12V)
DVI-I DVI or VGA data transfer from TFT display to the system
RJ10/RMT
RMT, "Remote", serves the on/off activation of the BEETLE
system. Corresponds to the function of the On button at the
BEETLE system.
If the power is not supplied by a BEETLE system you have to use an
external power supply unit.
Only UL Listed LPS (Limited Power Source) power supplies can be used.
By connecting the system's cable the screen will be switched on.
Connecting the BA83
Remove the bezel of the monitor and the cable cover of the base.
Before connecting cables switch off the system and disconnect it from the
mains supply.
CONNECTING THE BA83
22
DVI- IDC Po wer Jack/12 V
RJ10/RMT
USB- A
Po wer edUSB
(12)