User guide

Connecting peripherals
The peripherals mentioned here are available as options and are not part of
the basic configuration. A separate manual is provided for each of the
connectable components. For more detailed information, please consult the
relevant documentation.
The figure shows the back panel of the BEETLE /M-II (F1 CPU), standard
version, with the locations of the connecting sockets and connecting plugs.
If you wish to connect a monitor, however, you must also have a video
board.
Connecting peripherals with the system switched on is not allowed, except
USB (exception: USB devices).
Rear pa nel of the BEET LE /M-II (Stan dard)
Key bo ard (KYBD)
The BEETLE /M-II has a 6-pin mini-DIN jack for connecting a keyboard.
Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning. Power is supplied to the keyboard via this socket. If you
wish to connect a standard PC keyboard with DIN connector, you must use
a special adapter cable, obtainable from the Wincor Nixdorf International
GmbH branch office responsible for your area.
CONNECTING PERIPHERALS
20
DC24V
1
0
100-120 V / 2 A max
200-240 V / 1 A max
CASHDR
KYBD
COM1
SPK
MIC
COM2*
USB
B
A
COM4*
COM3*
LAN