User`s guide

Whirlpools & Diverters.

If the whirlpool jet is left in the off position for long periods of time the water behind it has nowhere to go and

will sit stagnant. Stagnant water is not being cleaned by the ozone and the chlorine you add after each use

has no way of reaching it. This means it can become a breeding ground for algae, fungus, or bacteria. The

same principle is true if you have a spa equipped with a diverter handle that transfers power from one seat to

another. Leaving the power all on one seat all the time will leave stagnant water behind the seat not in use.

To avoid these problems be sure to leave the diverter handle centered between the two seats when not in use

so the daily purge cycle will ﬂush those lines. Also make sure to turn your whirlpool jet on from time to time

for the same reason.

Heavy Objects.

Do not drop heavy objects like rocks, submersible pumps, or any kind of metal objects in your spa. If they

sink too fast and hit the bottom, damage to the acrylic and/or the shell structure may occur. Damage of this

sort is considered excessive abuse and is not covered under warranty.

Enjoy Your New Wind River Hot Tub!

Disclaimers