Specifications

26
5s
RESET
5s
RESET
5s
RESET
5s
RESET
5s
RESET
Operation
2.10.1.2 Time
This time is used for the time control of the pellet feed, automatic
heating surface cleaning and automatic ash compression.
If the VarioWIN is operated with an MES control, the time is auto-
matically adopted from the module and the time set here is over-
written.
If the VarioWIN is operated with REG standard control, the time
must be set here too.
Pressing one of the six buttons switches the lighting and display
on – Fig. 61.
Fig. 61
Fig. 62
Fig. 63
Fig. 64
Fig. 65
Press the Menu button – Fig. 62.
Confirm the selected menu item „Operator level“ by pressing the
Choose button – Fig. 63.
Confirm the selected sub-menu item „Time“ by pressing the Choo-
se button – Fig. 64.
Use the arrow buttons to set the required time – Fig. 65.
Set time
Save
– Yes No +
13:50
Boiler temperature
(Operating phases)
Lighting ON
42
°C
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switc hing
Time profile ash comp.
Choose Back
Boiler temperature
(Operating phases)
Info Menu
42
°C
Operator level
Service level
Choose Back