Specifications

ManualsBrandsWindhager ManualsBoilerVarioWIN

Burning duration with 25 kg pellets

VarioWIN Burning duration at nominal output

VAE 120 P approx. 10 h

RESET

The factory setting for „Feed operating mode“ is „switched off“.

Without time control: Select this if the feed noise (suction turbine)

is not audible or intrusive in the living area (or adjacent premi-

ses). This mode guarantees the fewest possible feeds because

the reserve supply container is always „run to empty“.

Functional description: The pellet feed is automatically switched

on if required at any time.

With start time: Select this if you want the feed to start at the same

time every day.

Functional description: The reserve supply container is filled

every day if required at the set time (see page 31). Interim fills

are also performed if the filling amount is not sufficient for 24

hours.

With enable time: Select this if the feed noise (suction turbine) is

audible or intrusive in the living area (or adjacent premises).

Functional description: The pellet feed is enabled during a time

period that can be set (see page 32) and is automatically star-

ted at this time if required. The reserve supply container is fully

refilled at the end of the enable time, if required.

Tip: A complete fill sucks in about 25 kg of pellets. Even if more

pellets are required during the blocked time, there is no automatic

fill and the VarioWIN switches off (fault message 381). Therefore,

do not select a lock-out time that is too long.

Fig. 74

Operation

Fig. 75

Fig. 77

It is only ever possible to select one menu item at a time. The

„Time profile feed“ corresponding to this selected menu item

can then be set in section 2.10.1.4.

Fig. 76

Use the

arrow

buttons to select the required sub-menu item – Fig. 74.

Save the changed feed operating mode by pressing the

Yes

button –

Fig. 75. The display shows „Parameter is saved“ for a few seconds

(Fig. 76) and then changes back to the previous level – Fig. 77.

The menu item or sub-menu item is exited by pressing the

Back

but-

ton (Fig. 77) or after a delay of 45 seconds.

Feed operating mode

with enable time

with start time

without time control

switched off

Save

Yes No

Feed operating mode

with enable time

with start time

without time control

switched off

Save

Yes No

Parameter is

saved

.....

(Animated symbol)

Boiler cleaning

Time

Feed operating mode

Time profile feed

Probe switching

Time profile ash comp.

Choose Back