Specifications

32
5s
RESET
5s
RESET
5s
RESET
5s
RESET
5s
RESET
„with enable time“
The start and end of the enable time can be set here in the „Time
profile feed“ menu item if the „with enable time“ setting is active
in the „Feed operating mode“ menu item (see section 2.10.1.3).
Factory setting „Feed enable time“: Start 07:00
End 22:00
Use the
arrow buttons to select the time you want to change,
„Start“ or „End“ – Fig. 87.
Confirm the selected time by pressing the
Choose button – Fig. 88.
Fig. 87
Operation
Fig. 88
Fig. 89
Fig. 90
Fig. 91
Pressing the + or – button changes the time in 15 min. steps – Fig.
89.
Save the changed time by pressing the Yes button – Fig. 90. The
display shows „Parameter is saved“ for a few seconds (Fig. 91) and
then changes back to the previous level.
Feed
enable time
Start 07:00
End 22:00
Choose Back
Feed
enable time
Start 07:00
End 22:00
Choose Back
Feed
enable time
Start 07:00
End 22:00
Save
– Yes No +
Feed
enable time
Start 07:00
End 22:00
Save
– Yes No +
Parameter is
saved
.....
(Animated symbol)