Specifications

3.8 Top heating surfaces and linkage

These parts are automatically checked and cleaned as part of the annual maintenance by WINDHAGER Customer

Service or the customer service PARTNER.

Fig. 140 Removing the cover

Fig. 141 Removing the wing nuts and cover

Fig. 142 Removing the jet protection plate

Care, cleaning and maintenance

Fig. 143 Cleaning top heating surfaces and linkage

Fig. 139 Switching off the VarioWIN

– Unscrew two wing nuts from the heating surface cover and remove the complete cover – Fig. 141.

– Remove the jet protection plate (tip: vacuum out fly ash first using a vacuum cleaner) – Fig. 142.

Fig. 144 Connect the key and move it back

and forth several times

Fig. 145 Emptying the ash pan

– Empty the ash pan for heating surfaces – Fig. 145.

– Vacuum down the top heating surfaces and linkage or clean with a cleaning brush – Fig. 143.

– For VarioWIN Premium only (manual heating surface cleaning): Connect the key on the right-hand side and

move it back and forth several times – Fig. 144.

Always switch the boiler off first with the ON/OFF button (Fig. 139) and wait until burnout mode has

finished. It is essential to let the boiler cool down before cleaning.

– Remove the front cover – Fig. 140.