User's Manual

Page 17 of 17

2003 Windigo Systems
BlueManager User Manual
Delete
The Delete option allows a user to delete a device from the Tree View and the List View.
NOTE: If an inquiry is later performed and the device is rediscovered, it will appear again in the
list. If a device is trusted, deleting the device WILL NOT remove its trusted status. If both
devices have trusted each other, the remote device will STILL be able to connect to your device
without getting a Passkey request.
If a file or folder is selected, then (if their properties allow permission to the user) they will be
deleted from the remote device. If the operation is successful, then the List View and Tree View
will be refreshed to show that the file/s or folder/s are gone.
How To Delete A Device Or A File
Select the Delete option from any of these locations:
· Select a device, file, or folder in the List View and select
Edit, Delete
.
· Select a device, file, or folder in the Tree View and select
Edit, Delete
.
· Select a device, file, or folder in the List View and select
File, Delete File
.
· Select a device, file, or folder in the Tree View and select
File, Delete File
.
· Select a device, file, or folder in the List View and press the Delete key on the keyboard.
· Select a device, file, or folder in the Tree View and press the Delete key on the keyboard.
· Right-click on a device, file, or folder in the List View and select
Delete
.
· Right-click on a device, file, or folder in the Tree View and select
Delete
.
Disconnect
The Disconnect option allows a user to drop a connection to a remote device such as a file
transfer connection. In other words, when you are connected to a remote device, you are not
allowed to connect to a different remote device until the current connection is ended. Thus, the
disconnect option a user to easily drop an active connection.
How To
Disconnect
From A Remote Device
Select the Disconnect option from one of these two places:
· Right-click on the remote device in the Tree View and select
Disconnect
.
· Right-click on the remote device in the List View and select
Disconnect
.