2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 Windigo Products Windigo Bluetooth(TM) Headset User manual (Mini Headset Module) Ver.1.0 Friday, August 20, 2004 2210 O'Toole Ave #200 San Jose, CA 95131 TEL : 408.576.1770 FAX : 408.576.1790 info@windigosys.com http://www.windigosys.
210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 1. Introduction Bluetooth profile K-6 gives an implementation guideline for Bluetooth headset application, which includes two functions: Bluetooth headset and Bluetooth audio gateway. Generally headset profile will be implemented in headset, and audio gateway will be implemented in cellular phone, PBX or other communication devices. Windigo systems has developed a fully Bluetooth V1.1 compliant headset module.
2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 Both amber LED and blue LED are used to indicate various operation status for the headset, such as pairing, connecting, talking…etc. The three buttons are used to initialize various operations, such as activating the headset, turning off the headset, pairing, connecting, etc. Audio connections are used to connect an external microphone and speaker.
2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 Now the headset is ready to use. The headset will ring whenever there is an incoming call. Step 4A: Answering the incoming call. When the headset is ringing, user can pick up the call by pressing the talk button once shortly. Note: Make sure the cellular phone has been configured correctly so an incoming call is transferred to the headset via Bluetooth link. Step 4B: Reject the incoming call.
2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 Step 7: Mute/un-mute the microphone during talking. User can mute/un-mute the microphone temporally by depressing volume up button for about 3 seconds. If the microphone is muted, to un-mute the microphone, user can depress either volume button for 3 seconds. Step 8A: Using voice dial.
2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 LED flashes four times quickly every 1-second interval Headset is in talking (SCO connected) mode 5.
2210 O’Toole Ave. #200, San Jose, Ca.
2210 O’Toole Ave. #200, San Jose, Ca. 95131 Tel: 408-576-1770 Fax: 408-576-1790 7. Key parameters settings Here lists all the parameters preset to Windigo Headset module, and also please be noted that these parameters can be customized based on customers preference. A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. P. Q. R. S. T. U.