User's Manual
Table Of Contents
Charging Music Angel (For with battery only)
Before using music angel who has the battery, you must charge the headset for approximately
two hours. When fully charged, the battery provides up to 3 hours of talk time and up to 120 hours of
standby time.
To charge the headset
1. Plug AC adapter into the AC jack on music angel, when the music angel is charging, the
Amber LED on the music angel will light.
2. After charging finish the Amber LED will off, unplug the AC adapter from the AC jack.
Battery indication: The Amber LED on the ear hooker will remain on while music angel
battery is in charging, and when battery is fully charged, Amber LED will be off. And the Amber
LED will flash to indicate the battery low.
Powering Music Angel
With battery music angel
To turn on the Bluetooth on music angel
Press and hold the BT button for four seconds. The Blue LED will be flashed 3 times and you will hear
ON tone. The music angel turns on, ready to make and receive calls.
To turn off the Bluetooth on music angel
When the music angel is on, press and hold the BT button for four seconds. The Blue LED will be
flashed 3 times and you will hear ON tone. The music angle turns off.
Without battery music angle
To power on the music angel
Plug the music angel into remote control connecter on the MP3/CD/Workman, then the music angel will
share power with MP3.
To turn on the Bluetooth on music angel
Press and hold the BT button for four seconds. The Blue LED will be flashed 3 times and you will hear
ON tone. The music angel turns on, ready to make and receive calls.
To turn off the Bluetooth on music angel
When the music angel is on, press and hold the BT button for four seconds. The Blue LED will be
flashed 3 times and you will hear ON tone. The music angle turns off.
Pairing OLED headset to your cell phone
Pairing is the process of linking the headset with your Bluetooth cell phone. Before you use Bluetooth
function on music angel, you must pair the devices with you cell phones. After this process is
completed, you can use the Bluetooth function on music angel only with its paired cell phone. If you
wish to use the Bluetooth function with a different cell phone, you must repeat the pairing process with
the new cell phone. In this case, the music angle will no longer work with the original cell phone.
Before you pair the music angel, ensure that the music angel has full power supply.
Confidential
This document contains confidential information, trade secrets, and copyrighted expressions that are the property o
f
Windigo Systems. 2210 O’Toole Ave #200, San Jose, CA95131 Tel: 408.576.1770 Fax: 408.576.1790. Any disclosure,
reproduction, sale or license of all or any part of the information or expression contained in this document is prohibite
d
b
y California law and the United States copyright law, and may be subject to criminal penalties. If you are not a
n
employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document,
please contact Windigo Systems immediately at the address above.





