User's Manual

You can transfer the calls connected to your headset back to your cell phone, or from your cell phone to
your headset
To transfer calls from your headset (phone dependent)
To transfer calls from you cell phone
With the call connected to your cell phone, Press BT button on your music angel.
Adjust the volume
To increase the volume
With talking mode, press (click) the Volume button + to increase volume by 1 step, repeat this
procedure until you have reached the desired level.
To decrease the volume
With talking mode, press (click) the Volume button - to decrease volume by 1 step, repeat this
procedure until you have reached the desired level.
Muting headset
You can mute and un-mute the microphone temporarily so that you cannot be heard by the connected
party.
To mute the headset
With talking mode, press and hold the volume button + for 3 seconds.
To un-mute the headset
When microphone is muted, press and hold volume button + for 3 seconds.
Visual and audible indications
Visual indication
Two LEDs (blue and amber) indicate the status of the headset:
Status Indication
Battery is full Amber LED are off
Battery is low Amber LED flash
Headset is off Both LEDs are off
Headset is in standby mode,
ready to make and receive calls
Blue LED flashes at three -second
intervals
Headset is in pairing mode Blue and amber LEDs flash alternately.
Audible Indicators
Tones heard through the headset provide an audible indication of a requested action:
Tone Indicates
Confidential
This document contains confidential information, trade secrets, and copyrighted expressions that are the property o
f
Windigo Systems. 2210 O’Toole Ave #200, San Jose, CA95131 Tel: [phone] Fax: [phone]. Any disclosure,
reproduction, sale or license of all or any part of the information or expression contained in this document is prohibite
d
b
y California law and the United States copyright law, and may be subject to criminal penalties. If you are not a
n
employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document,
please contact Windigo Systems immediately at the address above.