User Manual

ManualsBrandsWindigo Systems ManualsAudio EquipmentBluetooth Headset

Confidential

This document contains confidential information, trade secrets, and copyrighted expressions that are the property of

Windigo Systems. 2210 O’ Toole Ave #200, San Jose, CA95131 Tel: 408.576.1770 Fax: 408.576.1790. Any disclosure,

reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited

by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an

employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document,

please contact Windigo Systems immediately at the address above.

OLED Headset User guide

Author: Justin SH CHEN

Last updated:

Document History

Date Author Summary of change Note

01/17/05 Justin SH CHEN Initial Version

01/18/05 Justin SH CHEN

Add the pictures to illustrate OLED

headset operation

01/19/05 Justin SH CHEN Correct the mark in the OLED

01/25/05 Thompson Tang User Guide Reviewing

04/02/05 Justin SH CHEN Change the view phonebook function

04/04/05 Justin SH CHEN Update the view phone book function

04/13/05 Justin SH CHEN Added the notice part

04/14/05 Justin SH CHEN

Added the tips for browse cell phone’ s

phone book

Summary of content (8 pages)

PAGE 1
OLED Headset User guide Author: Justin SH CHEN Last updated: Document History Date 01/17/05 Author Justin SH CHEN 01/18/05 Justin SH CHEN 01/19/05 01/25/05 04/02/05 04/04/05 04/13/05 Justin SH CHEN Thompson Tang Justin SH CHEN Justin SH CHEN Justin SH CHEN 04/14/05 Justin SH CHEN Summary of change Initial Version Add the pictures to illustrate OLED headset operation Correct the mark in the OLED User Guide Reviewing Change the view phonebook function Update the view phone book function Added the not
PAGE 2
Note This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
PAGE 3
OLED headset Fig 1 Charging OLED headset Before using the OLED headset, you must charge the headset for a minimum of two hours. When fully charged, the battery provides up to 5 hours of talk time and up to 120 hours of standby time. To charge the headset 1. Plug the AC adapter connector into the AC jack on the ear hook. The Amber LED on the ear hook will be illuminated when the headset is charging, 2. After charging is finished, the Amber LED will be off. Unplug the AC adapter connector from the AC jack.
PAGE 4
Powering OLED Headset To turn on the headset Press and hold the Talk button for 4 seconds. The “On…” will be displayed on the screen and you will hear a tone. The headset will then be placed in “ Standby” mode and it will be ready to make and receive calls. To turn off the headset When the headset is on, press and hold the Talk button for 4 seconds. The “Off…” will be displayed on the screen, and you will hear the tone. The headset will then be switched off.
PAGE 5
Note: Currently, OLED headset just supports English caller Name. To disable the caller ID display Press both the volume + and Volume – concurrently, the “CID blocked” will be display on the screen. To enable the caller ID display When the caller ID display function is disabled, press both the volume button + and Volume button – concurrently, the “CID enabled” will be display on the screen. View phone book You can view and browse the phone book from the OLED headset directly.
PAGE 6
1, Press either Volume button + or Volume button - to get the phone numbers from your phone book. 2, Press Talk button on your headset, the call is automatically connected to your mobile phone. Receiving calls You must configure your mobile phone to answer calls directly on your Bluetooth headset. Refer to the mobile phone user guide for instructions for initiating this feature. 1, when your mobile phone rings, press the Talk button on your headset. The call is automatically connected to your headset.
PAGE 7
Three way call With a third call, press and hold Volume button -. “Switching…” will be displayed on the screen. Visual and audible indications Visual indication The visual indication on the screen is made up of 4 sections including Icons, Caller ID, Caller Name, and Status, and each section provides user information and operational information. The screen demo is shown as Fig 2. Fig 2 1, Icons The first icon indicates the headset function mode. —— Indicates no audio connection in headset.
PAGE 8
4, Status Headset status States Indication Standby “ Standby” Pairing “ Pairing…” Trying to Connect to the phone “ Connecting…” Finish Connecting to the phone “ Ready” Operation status Operation Indication Power on “ On…” Power off “ Off…” Incoming call “ Answering…” Accept incoming call “ Answered” Reject incoming call “ Call Reject” Last number redial “ Redial” Voice dial “ Voice dial” Call phone book/stored numbers “ Calling…” Three way call “ Switching…” Three way call “ Switching…” Disable show caller