User Manual

Confidential
This document contains confidential information, trade secrets, and copyrighted expressions that are the property of
Windigo Systems. 2210 O’ Toole Ave #200, San Jose, CA95131 Tel: [phone] Fax: [phone]. Any disclosure,
reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited
by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an
employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document,
please contact Windigo Systems immediately at the address above.
1, Press either Volume button + or Volume button - to get the phone numbers from your phone book.
2, Press Talk button on your headset, the call is automatically connected to your mobile phone.
Receiving calls
You must configure your mobile phone to answer calls directly on your Bluetooth headset.
Refer to the mobile phone user guide for instructions for initiating this feature.
1, when your mobile phone rings, press the Talk button on your headset. The call is
automatically connected to your headset.
Reject calls
When your mobile phone rings, press and hold the Talk button on your headset for 3 seconds.
Ending calls
When you have finished your call, press the Talk button on your headset. The call will be disconnected.
Transfer calls
You can transfer the calls connected to your headset back to your mobile phone, or from your mobile
phone to your headset
To transfer calls from your headset (phone dependent)
To transfer calls from you mobile phone
With the call connected to your mobile phone, Press Talk button on your headset.
Adjust the volume
To increase the volume
Whilst in talking mode, press (click) the Volume button + to increase volume by 1 step, repeat this
procedure until you have reached the desired level.
To decrease the volume
Whilst in talking mode, press (click) the Volume button - to decrease volume by 1 step, repeat this
procedure until you have reached the desired level.
Muting headset
You can mute and un-mute the microphone temporarily so that you cannot be heard by the connected
party.
To mute the headset
With talking mode, press and hold the volume button + for 3 seconds.
To un-mute the headset
When microphone is muted, press and hold volume button + for 3 seconds.