User Manual

Confidential
This document contains confidential information, trade secrets, and copyrighted expressions that are the property of
Windigo Systems. 2210 O’ Toole Ave #200, San Jose, CA95131 Tel: [phone] Fax: [phone]. Any disclosure,
reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited
by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an
employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document,
please contact Windigo Systems immediately at the address above.
Three way call
With a third call, press and hold Volume button -. “ Switching…” will be displayed on the screen.
Visual and audible indications
Visual indication
The visual indication on the screen is made up of 4 sections including Icons, Caller ID, Caller Name,
and Status, and each section provides user information and operational information. The screen demo
is shown as Fig 2.
Fig 2
1, Icons
The first icon indicates the headset function mode.
—— Indicates no audio connection in headset.
—— Indicates the headset is in talking mode.
The second icon indicates the headset connection mode.
—— Indicates the headset is waiting to connect to the mobile phone.
—— Indicates the headset is connected to the mobile phone.
The third icon is Volume icon
—— Indicates current volume level.
The fourth icon is Battery icon.
—— Indicates current battery level
2, Caller ID
State Indication
Show caller ID enabled Caller ID
Show caller ID disabled “ CID blocked”
3, Caller Name
State Indication
Get the caller name Caller name (English only)