Installation Guide

20 21
Step 4. Cut and attach the cosmetic panels.
This is the number on your side panel that falls just behind
the edge of the front frame.
The left and right numbers may be different if the AC is not perfectly
centered in the window.
Once you cut one side, repeat on the other, keeping in mind the number
(and where you cut) may be different.
(Make sure you are using the correct panel. They are
labeled “Left” and “Right”)
Cut straight, along the respective line. It’s better to leave
extra material - you can always recut but you can’t get
material back.
Determine the width of your
side panels.
1 2
Find the corresponding number on
your cosmetic panels.
You’re in business. Now for the last step.
Align and insert the end you just cut into the vertical
channel on both sides of the front frame. It helps to insert
the bottom corner rst and then the top. Then gently push
the panel into the slot.
Snap the three prongs into the corresponding slots on the
ends of the side panels. Repeat on both sides.
3 4
Insert the trimmed side panels
into the front frame.
Snap the prongs into place.