Operating Instructions (ENG) Instrucciones de manejo (ESP) Mode d’emploi (FR) Bedienungsanweisung (GER) Mode de Emploi (ITA) MODEL: Country WAV IFA - 10125060 Australia WAV IFB - 10125070 Britain WAV IFE - 10125080 Europe WAV IFOB - 10125090 Britain Beginning with Serial No. 1000039231 Voltage 240V 230V 230V 230V Read instructions before operating the machine. Antes de usar la maquina lea atentamente el libro de instrucciones. Lire attentivement le mode d’emploi avant la mise en service de la machine.
MACHINE DATA LOG Warranty Registration Thank you for purchasing a Windsor product. Warranty registration is quick and easy. Your registration will allow us to serve you better over the lifetime of the product. To register your product go to: www.windsorind.com/WarrantyRegistration.
TABLE OF CONTENTS (ENG) Machine Data Log.........................................2 Table of Contents..........................................3 HOW TO USE THIS MANUAL How to use this Manual.................................1-1 SAFETY Important Safety Instructions…………...2-1ENG Hazard Intensity Level…………………..2-2ENG Grounding Instructions………………….2-3ENG OPERATIONS Controls………………………………...…3-1ENG Machine Operation……………….……...3-2ENG Set Up…………………………….…….3-2ENG Operation…………………………….....
HOW TO USE THIS MANUAL This manual contains the following sections: - - HOW TO USE THIS MANUAL SAFETY OPERATIONS MAINTENANCE PARTS LIST The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards is identified that could result in product or personal injury, or severe injury resulting in death. The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. ! WARNING: To reduce the risk of fire, electric shock, or injury: Connect machine to a properly grounded outlet only. See grounding instructions. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. This machine is for dry use only. Do not use outdoors or on wet surfaces.
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
GROUNDING INSTRUCTIONS THIS PRODUCT IS FOR COMMERCIAL USE ONLY. EXTENSION CORDS: The use of an extension cord with this appliance is not recommended. If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and must be limited to 50 feet (15.5m) in length. GROUNDING INSTRUCTIONS: This appliance must be grounded.
CONTROLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Main Handle. Adjusts for operator comfort and storage. Brush on/off lever. Activates brush when depressed. Accessory vacuum hose and wand. Allows operator to clean edges, recessed, ledges, upholstery, etc. Detail tools Dusting brush, crevice and upholstery tools for above the floor cleaning. Dusting brush comes with adapter for attachment directly to hose. Upholstery and crevice tool connect directly to both the hose and the wand.
OPERATIONS WAVE SET UP 1. Take machine out of storage position by lowering onto all four wheels. 2. Adjust handle to comfortable position at waist level by opening adjustment lever on left side of machine and moving handle. Lock back into position by closing adjustment lever. 3. Install cloth filter bag inside the main body by pushing the rubber collar over the chute. FILTER/BAG COMPARTMENT 4. Unzip the cloth bag and place the paper bag inside. Push the rubber gasket seal over the chute.
OPERATION HOW IT OPERATES This machine is a portable, easy to use wide area vacuum designed for use indoors, in a commercial or light industrial environment. When operating as a carpet vacuum, soil is lifted from the carpet surface by a rotating brush and carried into a removable bag by the vacuum motors. 1. Large debris such as paper cups, plates, etc., should be picked up before starting the cleaning process. 2. Plan your cleaning route to work away from the electrical source.
MAINTENANCE NOTE: THE FOLLOWING SERVICE ITEMS SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE FACILITY OR AUTHORIZED SERVICE PERSONNEL. ALL PARTS REFERRED TO IN THESE INSTRUCTIONS CAN BE IDENTIFIED BY USING THE PARTS LISTS AND ILLUSTRATIONS ON THE FOLLOWING PAGES. ! WARNING REMOVE MACHINE POWER CORD FROM ELECTRICAL SOURCE BEFORE MAKING ANY REPAIRS OR ADJUSTMENTS TO THE MACHINE. TO ACCESS BELT/BRUSH MOTOR 1. 2. 3. 4. 5. 6. 7. 8. Place machine in the upright storage position.
MAINTENANCE DAILY MAINTENANCE 1. Shake out bag daily. 2. Check power cord for damaged or frayed insulation. 3. Return brush adjustment lever to “STORE” position when the machine is not in use. 4. Check for and remove any lint or debris around brush and brush housing. REGULAR/PERIODIC MAINTENANCE 1. Every 4 to 6 months remove wheels, clean axles, and apply a thin coat of silicone lubricant to axles. 2. The filter bag can be washed twice before losing the filtering capability.
WIRING DIAGRAM 86266500 PRV NO. 76070 BLK 86267010 VAC MOTOR 4 1 2 SWITCH REAR VIEW VAC MOTOR BLK 86268240 PRV NO. 88220 5 BLK 86268240 PRV NO. 88220 BLK 86010840 PRV NO. 880118 RED SWITCH 1 2 5 BRN LOAD 86267270 PRV NO. 880256 86005700 PRV NO. 57104 86266500 PRV NO. 76070 880255 PRV NO. 880255 LINE 86266950 PRV NO. 880123 ~ BLK FERRITE BLK RED PRV NO. 880248 BRUSH 86267250 PRV NO. 880254 86010640 PRV NO. 87016 VAC 1 AMP C.B. GRN BRUSH MOTOR 86267210 86005700 PRV NO.
BRUSH AND DRIVE GROUP 16 BRUSH ASSEMBLY -DETAIL- 15 Vacuum Door Assembly 25 43 42 41 38 12 7 26 11 4 9 27 44 40 6 36 12 39 3 37 2 28 5 38 18 30 22 35 29 BRUSH ASSEMBLY 34 20 BRUSH DRIVE MOTOR ASSEMBLY 21 22 19 21 10 VACUUM DOOR ASSEMBLY 23 46 18 24 A,B BRUSH SET 33 1 8 18 14 33 22 21 45 17 31 32 BRUSH DRIVE MOTOR ASSEMBLY 5-1 13 WAVIF 86038520 04/08/08
BRUSH AND DRIVE GROUP PARTS LIST 1 2 3 4 5 6 7 8 9 PART NO. 86031710 86011010 86229050 86008210 86000900 86001130 86000740 86005310 86006510 PRV NO.
BRUSH HEIGHT AND WHEEL GROUP MAIN FRAME ASSEMBLY 4 8 14 6 22 10 20 20 24 21 23 21 24 24 19 19 16 3 12 9 2 7 17 5 1 19 11 15 18 13 5-3 WAVIF 86038520 07/24/07
BRUSH HEIGHT AND WHEEL GROUP PARTS LIST REF PART NO. PRV NO.
VACUUM GROUP 5 6 14 13 4 9 10 17 18 7 (BRUSH SET) 15 8 16 11 3 12 2 1 5-5 WAVIF 86038520 05/15/07
VACUUM GROUP PARTS LIST REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 86276040 86064180 86232160 86068760 86215090 86001200 86230760 86006770 86003510 86086800 86237580 86003820 86010660 86275570 86006600 86062690 86258560 86010650 70586 36185 27538 140196 140949 140164 140216 70323 34012 73461 35204 35200 87025 70505 70114 29205 53615 87018 5 1 2 2 2 1 2 2 2 2 2 1 2 2 4 1 2 4 DESCRIPTION SERIAL NO.
HANDLE GROUP 34 27 25 23 4 31 29 33 3 5 37 24 21 32 HANDLE ASSEMBLY - DETAIL 9 27 19 22 2 14 20 11 HANDLE ASSEMBLY 7 28 35 36 28 27 6 1 16 18 10 15 12 8 13 26 17 30 5-7 WAVIF 86038520 05/15/07
HANDLE GROUP PARTS LIST REF PART NO. PRV NO.
LID/DECAL GROUP 18 17 16 14 15 13 4 7 6 12 3 1 10 2 5 11 8,9 5-9 WAVIF 86038520 05/15/07
LID/DECAL GROUP PARTS LIST REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 86003780 86234760 86006500 86031930 86237590 86255240 86006290 86245590 86245580 86245650 86245620 86245600 86000007 86274520 86002990 86283600 86000080 69034030 35171 27674 70024 51335 35207 73838 66285 50758 50757 50776 50762 50759 02083 70233 27744 02085 02084 - 1 1 2 1 2 1 2 1 1 1 1 1 1 6 3 1 1 1 DESCRIPTION SERIAL NO.
ELECTRICAL PANEL AND COVER GROUP 5 18 6 4 7 1A,C,D NUTS SUPPLIED WITH CIRCUIT BREAKER 2 3 8 4 10 12 19 22 20 21 25 11 24 15 23 16 13 14 17 5-11 WAVIF 86038520 05/15/07
ELECTRICAL PANEL & COVER GROUP PARTS LIST REF PART NO. PRV NO.
SUGGESTED SPARE PARTS PART NO PRV NO. 86001090 86215090 86003510 86236080 86001200 86230760 86001250 86135360 11041 140949 34012 34326 140164 140216 140212 14340 5-13 SERIAL NO. FROM DESCRIPTION BELT, 220 J-6 POLY-V BAGS, PAPER (PKG. OF 10) FILTER, VAC MOTOR FILTER, EXHAUST BAG, CLOTH BRUSH SET, 230V 5.