Operating instructions

14
Maintenance
Troubleshooting
PROBLEM CAUSE SOLUTION
Little or no solution flow Clogged spray jet on cleaning tool Remove and clean jets
Faulty pump Check and replace pump
Incorrectly attached solution hose Ensure solution hose coupler is securely
attached to the coupler on the solution tank
Loss of vacuum/Solution
recovery
Incorrectly attached vacuum hose Ensure Vacuum hose is pushed completely
onto the recovery tank inlet.
Obstruction in cleaning tool Inspect for and remove any debris.
Recovery tank is not securely
mounted on the solution tank
Tighten latch on either end of the machine
86221950 MINI-EXTRACTOR