Operating Instructions
Table Of Contents
- 86038230-cover
- 86038230 pg1
- 86038230 pg2
- 86038230 pg1-1
- 86038230 pg2-1
- 86038230 pg2-2 - fr
- 86038230 pg2-3
- 86038230 pg2-4 - fr
- 86038230 pg2-5
- 86038230 pg3-1
- 86038230 pg3-2
- 86038230 pg3-3
- 86038230 pg3-4
- 86038230 pg3-5
- 86038230 pg3-6
- 86038230 pg3-7
- 86038230 pg3-8
- 86038230 pg3-9
- 86038230 pg3-10
- 86038230 pg4-1
- 86038230 pg4-2
- 86038230 pg4-3
- 86038230 pg4-4
- 86038230 pg4-5
- 86038230 pg4-6
- 86038230 pg4-7
- 86038230 pg4-8
- 86038230 pg5-1-2
- 86038230 pg5-3-4
- 86038230 pg5-5-6
- 86038230 pg5-7-8
- 86038230 pg5-9-10
- 86038230 pg5-11-12
- 86038230 pg5-13-14
- 86038230pg5-15
OPERATIONS
ADMIRAL 86038230
3-6
Remove electrical cord and literature from
recovery tank. Fill solution tank (see filling
instructions page 3-5).
Adjust brush to proper setting. Note: For
good operation the brush must skim the
carpet. If circuit breaker trips raise brush to
prevent damage to motor or carpet.
Plug cord into grounded outlet. Note: Be sure
dome is seated on recovery tank, and float
shut-off is installed correctly.
Turn on brush and vacuum motor switches
(“ON”=“I”). Turn on solution switch for
continuous spray or set switch to intermittent
to allow use of trigger switches.
STEP
1
STEP
2
STEP
3
STEP
4
SOLUTION VACUUM
CONT
INT
BRUSH
ON ON