Specifications

www.advancedse.com.au

ACCESSORIES

Remote Vac Input Extention Kit

This newly designed accessory is available as an add on to your favorite Steam Way truckmount. It can be bolted

onto the frame of the 4100LX or to the floor next to the machine. It will come complete with 5 feet of 2 inch vac

hose...no vacuum cuffs are needed. This accessory will help dress up your machine installations and remove the

inconvenience of climbing in and out of the truck to attach the recovery hose to the waste tank.

Dual Wand Kit

A “Y’ Kit to convert your truck mount into dual-wand capabilities. Because your truck mounts have tremendous

power, high solution pressure, and vacuum suction, all it takes to convert your machine to dual wand cleaning is

the “Y” Kit. The pressure “Y” can also be used to run a Magna-Bright® In- Line Pressure Sprayer and your scrub

wand at the same time. For more information on the dual wand capabilities of your machine, contact Steam Way

International or your local distributor. When ordering your “Y” Kit Conversion System, specify a 2” or 2 1/2”

starting point.

Dual Wand Kit - 3/8” (Specify 2” or 2 1/2” Starting Point) part number 16-8001

Dual Wand Kit - 1/4” (Specify 2” or 2 1/2” Starting Point) part number 16-8002

Truck Mount Solution Accessory Hose with Warm-Up Valve

Have you ever stood in front of your truck mount frustrated at your inability to use its power to produce hot

water for more effective mixing of chemicals? This add-on truckmount warm-up valve serves two purposes: first,

it gives you the ability to give your heater a chance to warm-up so you will have instant heat at the wand, and

secondly, to give you hot water from your truck mount for rinse concentrate mixing and other uses. This efficient

time-saving device will make your job easier. It will also allow you to relieve the pressure from the solution line

from the truck.

Pollution Solution Waste Water Disposal System

Proper waste water disposal into the sanitary sewage treatment system is the right thing to do. The pollution

solution can be mounted into any waste tank to properly pump waste water to an authorized receptacle. Unlike

most other waste pumping systems, it operates while under a vacuum load and provides high volume waste water

pumping. This small compact unit uses a stainless steel mesh filter to prevent clogging for constant operation.

Switches for this system can be mounted on the front panel of your truck mount.

Solution (Pressure) Hose

Steam Way’s Solution Pressure Hose is made exclusively for Steam Way. This high pressure hose has ratings up to

3000 P.S.I. pressure and 250°F temperature. The outside diameter of the hose is only slightly larger than

conventional

1/4” hose but allows for better water flow for more efficient cleaning.

Part No. Hose With Quick Disconnects

3916425 Pressure Hose HV 25’, 1/4” QD 3926425 Pressure Hose HV 25’, 1/4” w/o QD’s

3916450 Pressure Hose HV 50’, 1/4” QD 3926450 Pressure Hose HV 50’, 1/4” w/o QD’s

3916625 Pressure Hose HV 25’, 3/8” QD

3916650 Pressure Hose HV 50’, 3/8” QD