Walk Behind Scrubber Operating instructions (ENG) MODELS: SC264 10052210 SCC264 10052250 BSCSC264 10052870 IPX4 Read these instructions before using the machine.
Machine Data Label Overview The Saber Cutter is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes or pads, and then vacuums the soiled water back into the recovery tank. Warranty Registration Thank you for purchasing a Windsor product. Warranty registration is quick and easy. Your registration will allow us to serve you better over the lifetime of the product.
Table of Contents Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How To Use This Manual . . . . . . . . . . . . . . . . . . . . . 4 Safety Important Safety Instructions . . . . . . . . . . . . . . . . . . 5 Hazard Intensity Level . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Label Location . . . . . . . . . . . . . . . .
How To Use This Manual The SAFETY section contains important information regarding hazardous or unsafe practices of the machine. Levels of hazards are identified that could result in product damage, personal injury, or severe injury resulting in death. This manual contains the following sections: • • • • • How to Use This Manual Safety Operations Maintenance Parts List The OPERATIONS section is to familiarize the operator with the operation and function of the machine.
Safety Important Safety Instructions When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer's recommended components and attachments.
Safety The following symbols are used throughout this guide as indicated in their descriptions: Hazard Intensity Level There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.
Safety Safety Label Location NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them.
Operations Technical Specifications ITEM Nominal power Rated Voltage Rated Amperage Batteries Scrub Brush Motors Vacuum Motor Propelling Motor Mass (GVW) Weight empty without batteries Solution Control Solution tank capacity Recovery tank capacity Scrub brush diameter for 26 in. (66 cm) scrub head Scrub brush pressure Scrub brush speed Tires Casters Foundation Pressure Maximum Speed Frame Construction Brakes (optional) Minimum aisle u-turn width with 26 in.
Operations Technical Specifications ITEM Height Length with 26 in. (66 cm) scrub head Width without squeegee and scrub head Width of squeegee for 26 in. (66 cm) scrub head Width of scrub path for 26 in. (66 cm) scrub head MEASURE 45 in. (114 cm) 64 in. (163 cm) 24 in. (61 cm) 35 in. (89 cm) 26 in. (66 cm) Length Width Height SPECIAL NOTES: The sound pressure level at the operator's ear was measured to be 72 dBA.
Operations How The Machine Works The Saber Cutter is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes, and then vacuums the soiled water back into the recovery tank. The machine's primary systems are the solution system, scrub system, recovery system, and directional control system.
Operations Components 12 14 3 1 7 2 15 11 9 6 8 4 10 13 5 1. Control Panel 2. Front Cover 3. Recovery Tank 4. Recovery Tank Drain Hose 5. Scrub Head Shrouds 6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Squeegee 11. Aqua-Mizer 12. Top Cover 13. Vacuum Motor 14. Recovery Tank Dome 15.
Operations Controls 13 2 5 3 9 6 8 15 1 4 10 7 14 11 12 12 86039070 CUTTER 24V
Operations 1. Key Switch 3. SPEED CONTROL KNOB 2. Emergency Shut Off Switch (Optional) Controls the speed of the machine. 3. Speed Control Knob To increase speed, rotate knob clockwise. 4. Propel Control Lever To decrease speed, rotate knob counterclockwise. 5. Reverse Button 4. PROPEL CONTROL LEVERS 6. Brush Switch Controls the machine direction, and scrub brushes and solution flow. 7. Brush Lift Lever 8. Solution Control Knob To propel machine forward, squeeze either propel lever. 9.
Operations 7. BRUSH PRESSURE LEVER 10. SQUEEGEE LIFT LEVER Adjusts the amount of brush pressure to the floor by raising or lowering the scrub deck. Raises and lowers the squeegee. To apply brush pressure, lower brush pressure lever to floating position. To apply additional pressure, place lever in restricted position. Lock the lever into the lower notch. Push the lever forward to move in a downward motion. Pull back on lever and release for floating position.
Operations 13. BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bar illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge.
Operations Machine Operation Filling Solution Tank Pre-Run Machine Inspection Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps. NOTE: See maintenance section for pre-run machine inspection checklist items. FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key. 1. Turn the machine power off. 2.
Operations Normal Scrubbing To Begin Scrubbing Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be the longest possible without turning, stopping, or raising and lowering scrub deck/squeegee. When operating the machine around people, pay close attention for unexpected movement. Use extra caution around children.
Operations Double Scrub Recovery Tank For floors which are heavily soiled or have thick accumulations of floor finish may not clean sufficiently with one pass. In these cases it will be necessary to double scrub. 1. Unhook the large drain hose from the retainer. Unscrew the T-handle on plug enough to loosen plug, then lower hose in direction of the drain. Do not stand in front of end of hose. Recovered solution will come out with force. Slowly remove plug from drain hose.
Maintenance Service Schedule MAINTENANCE Check batteries after charging; add water if necessary Check pad wear to prevent buildup of chemicals Check linkages and connectors for wear and damage Check hoses for wear, blockages, or damage Clean squeegee; check for adjustment; inspect for wear Check handles, switches, knobs, domes, and gaskets for damage Clean out recovery tank Clean out solution tank; remove and clean screen Clean outside of all tanks; check for damage Run vac motor for at least one minute to
Maintenance 5 1 7 9 6 11 3 8 4 2 1. Batteries 2. Squeegee 3. Aqua Mizer 4. Scrub Brushes 5. Recovery Tank Float Shut-Off 6. Solution Strainer 7. Brush Motor 8. Traction Motor 9. Circuit Breakers 10. Brush Shroud & Brush Skirts 11.
Maintenance Batteries The batteries provide the power to operate the machine. The batteries require regular maintenance to keep them operating at peak efficiency. The machine batteries will hold their charge for long periods of time, but they can only be charged a certain number of times. To get the greatest life from the batteries, charge them when their charge level reaches 25% of a full charge. Use a hydrometer to check the charge level. When servicing machine, avoid contact with battery acid.
Maintenance Checking Battery Specific Gravity To Charge the Batteries Use a hydrometer to check the battery specific gravity. When servicing machine, avoid contact with battery acid. Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep covers open when charging. Wear eye protection and protective clothing when working with batteries. Charge batteries in a well ventilated area. Leave the battery cover open.
Maintenance 5. Replace the battery caps, and leave them in place while charging. 6. Unplug the battery connector from the machine. FOR SAFETY: When charging, connect the charger to the batteries before connecting the charger to the AC wall outlet. Never connect the charger to the AC wall outlet first. Hazardous sparks may result. 7. Plug the charger connector into the battery connector. Connect the charger AC plug to a wall outlet. The charger gauge should indicate that the batteries are charging. 8.
Maintenance Squeegee Blades To Remove Squeegee Assembly The front squeegee blade allows solution to pass through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift. The front blade has four wear surfaces and can be rotated for extended life. The front blade should not require regular replacement under normal use. 1. With the squeegee in the up position, turn key switch "OFF". 2. Disconnect vacuum hose from squeegee and loosen both knobs. 3.
Maintenance To Adjust Squeegee Pitch 1. Choose a smooth, level surface. Turn "ON" the key switch. Lower the squeegee and drive forward at least 2 feet (60cm.). 2. With the squeegee down, stop the machine. Do not allow machine to roll back. To Adjust Amount of Rear Squeegee Deflection 1. Choose a smooth, level surface. Lower the squeegee and drive forward at least 2 feet (60cm). 2. With the squeegee down, stop the machine. Do not allow machine to roll back.
Maintenance Scrub Brushes Replacing or Installing Scrub Brushes There are four different types of brushes available to cover applications from cleaning heavily soiled floors to polishing. A pad driver is also available to take advantage of the many cleaning pads on the market. Please refer to the following to assist in selecting the proper brush or pad for the work at hand. 1. With the scrub deck up, turn "OFF" the machine. Uncoated Floors 3. Locate release lever on top of brush or pad driver.
Maintenance Solution Strainer Brush Motor Carbon Brush Replacement The solution strainer is located in front of the left front wheel. The solution strainer protects the solenoid valve from debris. If there is little or no solution flow to the ground, check the strainer for debris. Drain the solution tank and clean the solution strainer. To remove the strainer, turn the bottom part of the strainer counterclockwise until the bottom is separated. Clean out the debris from the wire mesh and re-assemble.
Maintenance Traction Motor Circuit Breakers Do not use a pressure washer to clean around the motors. Use tap pressure only. Circuit breakers interrupt the flow of power in the event of an electrical overload. When a circuit breaker is tripped, reset it by pressing the exposed button. If a circuit breaker continues to trip, the cause of the electrical overload should be found and corrected. 30 Amp. Protects the left scrub brush motor. Traction Motor Carbon Brush Replacement 30 Amp.
Maintenance Vacuum Motor (Refer to the Vacuum Group in the parts section of manual) Vacuum Motor Carbon Brushes Replacement (Ametek) End Cap Carbon Brushes Do not use a pressure washer to clean around the vacuum motors. Use tap pressure only. Care must be taken so that water is not directed into vacuum motor air intakes. Changing Vacuum Motor 1. Disconnect batteries from machine. 2. Remove front cover. 3. Disconnect electrical connector to the vacuum motor. 4.
Maintenance Greasing Axle RECOMMENDED GREASING: 1-2 strokes of Mobiltemp®78 or compatible clay-based or calcium-based grease.
Maintenance Machine Troubleshooting PROBLEM Poor or no water pick-up CAUSE Squeegee out of adjustment Debris caught on squeegee Worn squeegee blades Vacuum hose clogged Vacuum hose disconnected from squeegee or recovery tank Vacuum hose damaged Recovery tank not sealed Foam filling recovery tank Vacuum motor does not run, or Recovery tank full runs slowly Recovery tank float system dirty Circuit breaker tripped Loose connection Faulty vacuum switch Worn vacuum motor brushes Poor scrubbing performance Debr
Maintenance Machine Troubleshooting PROBLEM Little or no solution flow to the floor No power to machine Little or no propel CAUSE Solution tank empty Fill solution tank Solution flow turned off or set too low Solution strainer plugged Solution hoses obstructed Solution solenoid valve obstructed or stuck Vent hole in solution tank lid obstructed Battery disconnected Emergency shut-off activated (If included) Battery connections corroded Faulty main contactor Faulty key switch Low battery charge Wheels s
Notes: 86039070 CUTTER 24V 33
Notes: 34 86039070 CUTTER 24V
Parts PARTS 86039070 CUTTER 24V 35
Control Handle 10 1 6 3 5 2 4 7 8 9 11 36 86039070 CUTTER 24V
Control Handle REF PART NO. QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 86238730 86257230 86254920 86231480 86277070 86240990 86277060 86277050 86238740 86004120 86004130 1 2 2 2 2 2 4 4 1 - HANDLE, LEFT SWITCH SPST MOM NO W/LEVER SPRING, COMP .24ODX1.25X.018 BUTTON, PROPEL SCREW, 4-40 X .625 PHPNHMS STL ZNPLT HOUSING, BUTTON SCREW, 8-32 X .875 PHPNHTC SCREW, 5/16-18 X .75 SCHCS SS HANDLE, RIGHT PROPEL HANDLE ASM LEFT PROPEL HANDLE ASM RIGHT 86039070 CUTTER 24V SERIAL NO.
Cover (Front) & Tank Mount 4 5 8 7 2 3 9 3 2 10 1 6 38 86039070 CUTTER 24V
Cover (Front) & Tank Mount REF PART NO. QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 86070150 86010670 86276780 86062530 86004790 86276380 86278080 86271840 86010670 86068150 1 4 4 1 2 2 2 2 2 1 BRKT, TANK MOUNT 24V WASHER, 5/16 X .75 X .04 FLT SS SCREW, 5/16-18 X .75 HHCS SS COVER, FRONT, 24V GRY KNOB, 5/16 -18 4 PRONG SCREW, 5/16-18 X 1.25 SCHSET CP SS SCREW, 5/16-18 X 1.75 SCHSET CP SS NUT, 5/16-18 HEXTHIN NYLOCK SS WASHER, 5/16 X .75 X .04 FLT SS BRACKET, TANK SUPPORT 86039070 CUTTER 24V SERIAL NO.
Cover (Top) & Tank Mount 1 3 5 7 9 2 3 4 10 8 3 10 5 3 6 40 86039070 CUTTER 24V
Cover (Top) & Tank Mount REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 86062540 86271840 86010670 86239630 86276780 86073700 86069630 86233390 86271870 86276490 86292630 86276780 1 3 10 1 4 1 1 1 1 3 1 3 DESCRIPTION COVER, TOP, 24V, GRY NUT, 5/16-18 HEXTHIN NYLOCK SS WASHER, 5/16 X .75 X .04 FLT SS HINGE, COVER TO TANK SCREW, 5/16-18 X .75 HHCS SS BRTK, TANK LEFT BRKT, TANK RIGHT CLAMP, 7/8 DIA "P~CUSHIONED NUT, 1/4-20 HEXTHIN NYLOCK SS SCREW, 5/16-18 X .625 HHCS SS NET, CARGO SCREW, 5/16-18 X .
Decal 1 7 2 3 4 8 5 6 42 86039070 CUTTER 24V
Decal REF PART NO. QTY 1 2 3 4 5 6 7 8 86243560 86243540 86243530 86243600 86243550 86243180 86004970 86243590 1 1 1 1 1 1 1 1 DESCRIPTION SERIAL NO. FROM NOTES LABEL, CUTTER RIGHT LABEL, ELEC.
Electrical Panel DETAIL 'A' 14 15 34 1 16 2 3 17 40 35 6 33 7 4 29 29 30 13 SEE DETAIL 'A' 5 36 13 32 31 27 8 26 29 25 12AB 10 37 9 28 24 23 18 19 22 20 9 21 44 9 86039070 CUTTER 24V 10 36
Electrical Panel REF PART NO.
Lift Handle 4 5 6 7 3 8 4 2A 10 3 9 4 1 11 2B 46 86039070 CUTTER 24V
Lift Handle REF PART NO. QTY 1 2A 2B 3 4 5 6 7 8 9 10 11 86077260 86082560 86082280 86259410 86010670 86276780 86006930 86066860 86238360 86228840 86271840 86238350 1 1 1 2 6 4 2 1 1 2 2 1 DESCRIPTION LEVER, DECK, SWING PLATE, LEVER NOTCH, 24V BASIC PLATE, LEVER NOTCH BASIC WASHER, .510 X 1 X .063 THR WASHER, 5/16 X .75 X .04 FLT SS SCREW, 5/16-18 X .75 HHCS SS SCREW, 5/16-18 X 1 SCHBTNHCS SS BAR, SQG LIFT SWING 36V GRIP, 3/16 X 1.0 ORANGE BUSHING, .314 X .502 X .
Lift Handle Linkage 4 3 5 2 18 6 7 8 1 9 10 7 11 12 10 7 16 13 13 7 15 15 17 7 8 14 7 13 48 86039070 CUTTER 24V 10
Lift Handle Linkage REF PART NO. QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 86259400 86276920 86238430 86276780 86010670 86082270 86010630 86273820 86069610 86271870 86008650 86005630 86228900 86066730 86009560 86077480 86003240 86278910 3 2 1 4 4 1 6 3 1 3 1 2 3 1 1 1 1 2 WASHER, .510 X 1 THR SCREW, 3/8-16 X 1 HHCS SS NP GROMMET 1.00 ID 3/16 GRIP SCREW, 5/16-18 X .75 HHCS SS WASHER, 5/16 X .75 X .04 FLT SS PLATE, PIVOT WASHER, 1/4 X .625 FLT SS SCREW, 1/4-20 X 1.
Recovery Tank 1 2 3 4 25 7 20 5 11 24 23 22 6 21 19 8 7 11 10 9 26 26 18 12 17 15 50 16 86039070 CUTTER 24V 13 14
Recovery Tank REF PART NO. QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 86274220 86003340 86003990 86246080 86014810 86032540 86276290 86001190 86089630 86237650 86005660 86002400 86004180 86002840 86008400 86006240 86004450 86004260 86271870 86075540 86069780 86010630 86273810 86236410 86257860 86233140 1 1 1 1 1 1 5 1 1 2 2 1 1 1 1 1 1 1 2 1 1 2 2 1 1 2 SCREW, 6-32 X .625 PHPNHMS SS DOME, 13 X 11 GASKET, DOME LANYARD, 18.
Scrub Brush/Pad Driver 7 6 5 9 4 8 7 6 5 9 4 8 1 5 3 52 86039070 CUTTER 24V 2A 2B 2C
Scrub Brush/Pad Driver 26 INCH DISK: REF PART NO. QTY DESCRIPTION 1 2A 2B 2C 3 4 5 6 7 8 9 86000210 86000220 86000230 86000240 86005070 86276590 86276580 86276600 86007910 86007280 86005940 2 2 2 2 1 3 4 3 1 1 1 PAD DRIVER, 13" SD BRUSH, 13" POLY SD U19980 BRUSH, 13" NYLON SD U19981 BRUSH 13" MILD GRIT SD U19982 LOCK PAD CENTER SNAP, TWO STEP SCREW, 12-11 X 1 PHPNHSMS SS TYPEA SCREW, 8-32 X .75 PHTRHMS SS SCREW, 10-12 X .75 PHTRHSMS SS TYPEA SPRING EXT .31D X 2.0L X .
Scrub Deck Aqua-Mizer™-26IN Scrubhead 1 2 3 4 5 21 6 20 8 7 9 19 10 18 7 17 14 7 16 18 12 17 15 13 23 11 15 14 12 22 54 86039070 CUTTER 24V 7 8
Scrub Deck Aqua-Mizer™-26IN Scrubhead REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11A 11B 12 13 14 15 16 17 18 19A 19B 20 21 22 23 86006930 86228840 86259420 86259400 86255060 86082370 86010630 86271870 86255990 86256000 86001410 86135150 86276960 86249530 86273810 86005630 86249540 86228910 86276860 86001400 86135140 86271840 86082380 86024970 86024980 4 4 4 4 2 1 13 11 2 2 1 1 9 1 2 6 1 6 6 1 1 4 1 - DESCRIPTION SCREW, 5/16-18 X 1 SCHBTNHCS SS BUSHING, .314 X .502 X .5 FLG WASHER, .510 X 1 X .
Scrub Deck Motors 1 2 3 4 10 9 8 7 6 56 5 86039070 CUTTER 24V
Scrub Deck Motors REF PART NO. QTY DESCRIPTION 1 1A 2 3 4 5 6 7 8 9 10 86005320 86001890 86002830 86010790 86276970 86007020 86279130 86279630 86003420 86004810 86279640 2 2 8 8 2 2 2 2 2 2 MOTOR ASM, 24VDC 200RPM GEAR BRUSH SET, 53632 ASI CABLE TIE, .375 X 24.7 WASHER, 3/8 X .680 X .094 SPL STL ZNPLT SCREW, 3/8-16 X .75 HHCS SS SCREW, 5/16-18 X 1.25 HHCS SS NP WASHER, 5/16 X .583 X .078 SPL STL ZNPLT WASHER, 5/16 X 1.13 X .09 FLT DRIVER, BRUSH SD KEY, 1/4 X 1/4 X 1 LCSTL WASHER, .780 X 1.63 X .
Scrub Deck Skirt 15 1 8 16 17 9 24 13 22 1 2 14 12 3 10 20 5 4 23 21 9 8 7 9 11 8 18 6 19 58 86039070 CUTTER 24V
Scrub Deck Skirt REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 86290040 86069650 86271900 86010650 86062940 86277110 86161800 86271840 86292500 86270920 86273950 86062950 86011020 86001350 86277150 86082950 86069640 86066380 86007440 86066390 86007450 86004730 86004740 86244100 11 1 19 19 1 19 1 10 10 4 4 1 1 1 1 1 1 1 1 1 1 1 DESCRIPTION SCREW, 5/16-18 X .75 SCHBTNHCS SS BRKT, SHROUD LEFT NUT, 10-24 HEXTHIN NYLOCK SS WASHER, 10 X .562 X .
Scrub Deck Lift Linkage-26In Scrubdeck 12 3 4 5 7 4 7 11 7 9 4 7 6 7 8 4 10 4 1 5 2 7 4 3 13 5 60 86039070 CUTTER 24V
Scrub Deck Lift Linkage-26In Scrubdeck REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 86273780 86069910 86273740 86010630 86271870 86069920 86259400 86228920 86228900 86273820 86066770 86066720 86236650 6 1 2 8 10 1 10 2 2 2 1 1 1 DESCRIPTION SERIAL NO. FROM NOTES SCREW, 1/4-20 X .75 HHCS SS NP BRKT, ANGLE SUPPORT LEFT SCREW, 1/4-20 X 1.5 HHCS SS WASHER, 1/4 X .625 FLT SS NUT, 1/4-20 HEXTHIN NYLOCK SS BRKT, ANGLE SUPPORT RIGHT WASHER, .510 X 1 THR BUSHING, .252 X .503 X 1 BRZ BUSHING, .252 X .
Scrub Deck Lift Linkage-Center 6 1 12 2 2 3 4 3 2 1 2 1 3 4 4 14 2 12 6 13 5 4 2 13 2 3 10 4 2 7 1 4 9 8 4 4 5 7 10 2 2 2 5 6 5 5 6 6 11 62 86039070 CUTTER 24V 5 2 6 6
Scrub Deck Lift Linkage-Center REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 86273820 86010630 86228900 86259400 86259410 86271870 86228920 86070210 86070200 86273740 86273780 86066760 86090270 86254880 4 12 4 8 6 10 2 1 1 2 4 2 4 1 DESCRIPTION SERIAL NO. FROM NOTES SCREW, 1/4-20 X 1.25 HHMS SS WASHER, 1/4 X .625 FLT SS BUSHING, .252 X .503 X .75 FLG WASHER, .510 X 1 THR WASHER, .510 X 1 X .063 THR NUT, 1/4-20 HEXTHIN NYLOCK SS BUSHING, .252 X .503 X 1 BRZ BRKT, SCRUB DECK LIFT, L.H..
Scrub Deck Lift Linkage-Front & Rear 1 2 3 6 7 5 4 14 17 5 8 8 16 5 13 11 7 11 9 8 16 10 12 14 10 5 8 11 8 15 5 11 9 11 64 86039070 CUTTER 24V 7 5
Scrub Deck Lift Linkage-Front & Rear REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 86066990 86067000 86273810 86228900 86010630 86273820 86271870 86259410 86228920 86276780 86259400 86069750 86069900 86273740 86066740 86271840 86066750 1 1 3 1 6 1 6 5 2 4 5 1 1 2 1 4 1 DESCRIPTION SERIAL NO. FROM NOTES BAR, VERTICAL LINK BAR, VERTICAL BRAKE SCREW, 1/4-20 X 1 HHCS SS BUSHING, .252 X .503 X .75 FLG WASHER, 1/4 X .625 FLT SS SCREW, 1/4-20 X 1.
Solution 14 17 21 13 19 15 13 20 1 16 2 24 3 23 18 4 22 22 ANTISEIZE 13 25 6 11 12 10 7 8 5 13 9 66 86039070 CUTTER 24V
Solution REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 86273950 86234790 86246080 86014810 86008270 86240460 86282050 86233110 86271840 86276380 86222770 86197910 86010670 86276920 86279590 86005630 86069930 86069910 86277280 86068160 86005630 86271840 86279650 86274720 86032890 1 1 1 1 1 1 1 1 4 4 1 1 13 7 2 2 1 1 2 1 4 5 1 1 1 DESCRIPTION SCREW, 6-32 X .5 PHPNHMS SS COVER, CLP SOLUTION LANYARD, 18.
Solution 4 1 3 6 11 10 10 4 9 13 12 5 68 86039070 CUTTER 24V 8 2 7
Solution REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 86273750 86233150 86069790 86271870 86271830 86264940 86282190 86007560 86005870 86007750 86313160 86010540 86003460 86136820 86281100 86003580 86280820 86001550 2 3 1 4 2 2 1 1 1 1 1 2 1 2 2 DESCRIPTION SCREW, 1/4-20 X .625 HHCS SS NP CLAMP, 3/8 HOSE (D-SLOT) BRKT, FILTER/SOLUTION MOUNT NUT, 1/4-20 HEXTHIN NYLOCK SS NUT, 3/8-16 LK NYL BLK CABLE TIE 11.
Squeegee-26In Scrubhead 39 2 37 36 3 4 34 5 35 14 13 34 16 5 33 6 32 7 8 17 9 10 31 15 1 30 22 29 18 7 12 2 19 28 21 24 23 25 27 70 26 86039070 CUTTER 24V 20 11
Squeegee-26In Scrubhead REF PART NO.
Squeegee Lift Linkage (Lower) 1 2 3 17 4 5 6 7 1 16 8 15 14 9 10 11 13 12 72 86039070 CUTTER 24V
Squeegee Lift Linkage (Lower) REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART QTY DESCRIPTION NO. 86008670 2 COTTER 3/8" RING 86069450 1 BRKT, SQG PIVOT LIFT 86271840 2 NUT, 5/16-18 HEXTHIN NYLOCK SS 86228840 2 BUSHING, .314 X .502 X .5 FLG 86259420 2 WASHER, .510 X 1 X .093 THR 86009200 1 KNOB, 3/8-16 4 PRONG ALUM 86279510 1 WASHER, 3/8 X 1 X .083 FLT STL ZNPLT 86082150 1 PLATE, SQUEEGEE MOUNT 86007270 1 SPRING COMP 1.100DX2.0LX.
Vacuum 10 5 9 4 8 11 12 14 6 4 5 13 15 2 3 1 74 86039070 CUTTER 24V 7
Vacuum REF PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 86276920 86278910 86005630 86001620 86002400 86271870 86005460 86230810 86326980 86010630 86273810 86091170 86233430 86064910 86070630 QTY 3 3 3 1 2 3 1 3 3 1 1 1 1 DESCRIPTION SERIAL NO. FROM NOTES SCREW, 3/8-16 X 1 HHCS SS NP WASHER, 3/8 X .875 X .05 FLT SS NUT, 3/8-16 HEXTHIN NYLOCK SS HOSE ASSEMBLY 1.5 BLK VAC X 67 CLAMP, 2.0" WORM GEAR X .
Wheels & Frame 7 6 4A 4B 4C 4D 4E 8 5 9 11 10 2 3 1 76 86039070 CUTTER 24V
Wheels & Frame REF PART NO.
Wiring-Battery 1 13 2 8 11 1 5 4 12 9 10 6 7 78 3 86039070 CUTTER 24V
Wiring-Battery REF PART NO. QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 86010120 86271870 86271910 86008920 86009000 86010850 86010860 86260520 86233360 86270890 86010650 86273980 1 2 8 8 3 1 1 2 1 1 1 1 CONNECTOR 175 DCA RED W/O TERMS NUT, 1/4-20 HEXTHIN NYLOCK SS NUT, 5/16-18 FLEX LK STL GRA CDPLT BOOT, RUBBER TERM. ISOLATOR WIRE4X9.
Wiring-Control Panel DIAGRAM B DIAGRAM A 51 RED 30 RED 49 BLK 56 RED 48 BLK 47 RED 52 RED 29 YLW 43 BLK 50 BLK 62 BLK 63 RED 63 BLK 26 RED 26 RED 61 BLK 28 WHT 27 GRN 61 BLK 65 RED 86269300 PRV NO.
Wiring-Control Panel REF PART NO. QTY 1 2 3 4 5 6 86238990 86261210 86003410 86267340 86269300 86267360 1 2 1 2 1 1 DESCRIPTION SERIAL NO.
Wiring Group - Main Harness 74 RED LEFT BRUSH MOTOR 76 RED RIGHT BRUSH MOTOR 75 BLK 77 BLK 72 RED VAC MOTOR 73 BLK DIAGRAM A 75 BLK 73 BLK 78 RED 79 BLK 76 RED 69 RED 77 BLK 74 RED 68 GRN/YLW 72 RED SOLENOID VALVE DIAGRAM B 5 BRN 1 68 GRN/YLW 69 RED PROPEL MOTOR 78 RED 79 BLK A B 82 86039070 CUTTER 24V 6 BLK
Wiring Group - Main Harness REF PART NO. QTY 1 86238980 1 DESCRIPTION SERIAL NO.
86261210 86261210 86003410 Wiring - Schematic-SC264 INDICATES OPTIONAL ACCESSORY 84 86039070 CUTTER 24V
86261210 86003410 86261210 Wiring - Schematic-SCC264 INDICATES OPTIONAL ACCESSORY 86039070 CUTTER 24V 85
Notes: 86 86039070 CUTTER 24V
Options OPTIONS 86039070 CUTTER 24V 87
Brake 10 8 14 9 14 15 11 16 13 17 2 1 6 9 4 4 10 3 2 1 5 11 7 9 2 12 88 86039070 CUTTER 24V 8 11 12
Brake REF PART NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 86248370 86006220 86252070 86231330 86255060 86070070 86234850 86272610 86231820 86008660 86010630 86271870 86070150 86259400 86228900 86273820 86077280 2 3 1 2 2 1 1 2 1 2 6 5 1 1 1 1 2 DESCRIPTION SERIAL NO. FROM NOTES PAD, BRAKE PIN, ROLL 1/4 X 1.25L ROD, BRAKE 24V BUSH, BRZ FLG .63 X .75 X 1.0 SPRING, EXT .43D X 2.50 L X .
Emergency Stop 1 90 86039070 CUTTER 24V
Emergency Stop REF PART NO. QTY 1 2 86007180 86269300 1 1 DESCRIPTION SWITCH, EMERGENCY STOP WIRE, 16" RED/18 STRIP X STRIP 86039070 CUTTER 24V SERIAL NO.
Accessory Pump 13 12 14 15 3 SOLUTION RECOVERY BRACKET 10 1 2 17 3 8 11 4 9 2 7 10 3 6 16 TO COUPLING 3 5 17 3 3 92 TO FILTER (EXISTING HOSE) 86039070 CUTTER 24V
Accessory Pump REF PART NO.
Battery Charger-SCC264 94 86039070 CUTTER 24V
Battery Charger-SCC264 REF PART NO. QTY DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 86232940 86031810 86073430 86226550 86005810 86275490 86279520 86268010 86268000 86268020 86251450 86133400 86234390 86268060 86075390 1 1 2 1 6 6 8 1 1 1 1 0.125 1 1 1 CCHARGER, DELTA Q, 24V, 25A COVER, TOP, 24V GRY OBC BRKT, CHARGER DELTA-Q GROMMET, 1/2 ID X 1/4 GROOVE NUT, 1/4-20 HEX NYLOCK SS SCREW, 1/4-20 X 1 SCHBTNHCS BLKOX WASHER, 1/4 X .625 X .
Suggested Spare Parts PART NO.
Notes: 86039070 CUTTER 24V 97