Industries Carpet Cleaner User's Manual

CONTROLS/COMPONENT LOCATIONS
CADET 86038340 04/19/07
3-2ENG
1. Main Handle. Used to pull and maneuver
machine.
2. Electrical Cord.
3. Pump Switch. Turns on pump and enables
spray.
4. Brush/Spray switch. Turns on brush motor
and activates electro-valve to dispense
solution to floor through jets. Intermittent, off,
and continuous settings.
5. Vacuum Motor Switch. Turns on vacuum
motor
6. Brush Motor Circuit Breaker. 4 amp.
Breaker protecting brush motor.
7. Vacuum Motor Circuit Breaker. 7 amp.
Breaker protecting vacuum motor.
8. Recovery Dump Hose. Facilitates draining
dirty cleaning solution.
9. Solution Dump Hose. Facilitates draining
excess cleaning solution from solution tank.
2
1
4
6
7
8
9
3 5