Operating instructions

SUGGESTED SPARE PARTS
SABER (QSC) 86037050 08/10/09
5-59
PART NO. PRV NO. DESCRIPTION SERIAL NO. FROM NOTES:
86216150 140588 BRUSH SET, 24V TRANSAXLE
86135370 14548 BRUSH SET, 24V 3ST VAC AMETEK
86135310 140686 BRUSH SET, 24V/36V VAC WINDSOR *(7)
86001910 14606 BREAKER, 30A 50VDC CIRCUIT
86001920 14607 BREAKER, 25A 50VDC CIRCUIT
86001970 14695 BRUSH SET, IMPERIAL 53185/630
86002000 14717 BREAKER, 3 AMP
86002510 23125 WIRE 4X15 BCLAMPXBCLAMP
86002540 23174 WIRE ASM 2X21 BATT W/ANDERSON
86003180 27870 CABLE, .09X29, 0707,SS,LB,E-E
86232180 27877 CAP, 3 INCH MPT
86002800 270121 CABLE, .062X43 SS PUSH/PULL
*(3)
86236400 34366 FLOAT SHUT-OFF
86237230 35087 GASKET, 5.7 VAC MOTOR
86003980 35249 GASKET, SQG .13 THK X 8.00 LG
86004790 48012 KNOB, 5/16-18 4 PRONG
86006360 67118 RELAY, 24VDC SOLENOID
86007220 72166 SWITCH, SPST MOMENTARY
86007140 72130 SWITCH, SPST 2-POSITION ROCKER
86007260 730003 BLADE, SQUEEGEE (URETHANE)
86253940 730140 SKIRT, 3.5 X 57.5” EXT
86007970 73864 STRAINER, 3/8 IN. NPT 60 MESH
86252520 80885 SAFETY DECAL, BATTERY CAUTION
86252530 81494 SAFETY DECAL, SOLUTION WARNING
* SEE SERIAL NUMBER PAGE
NOTES: