manual

INSTALLATION
8
2. EXTENSION INSTALLATION (OPTIONAL)
a. AFTER COMPLETING STEP A – D OF STANDARD INSTALLATION,
replace the standard support frame and duct cover with either the
extension set or the short duct cover set.
b. REPEAT “STEP F – M” from STANDARD INSTALLATION.
3. DUCTLESS INSTALLATION (OPTIONAL)
a. AFTER COMPLETING Step A – E of STANDARD INSTALLATION
b. Remove the HIDK (ductless kit) and inspect for any sign of defect or
damage. (ie. dents, broken inlet)
c. Attach the ductless kit to the support frame and secure with the provided
screws.
d. Install the upper duct cover and secure it to the support frame.
e. Slide the lower duct cover up to the upper duct cover and hold in place.
f. Connect the 7‖ pipe between the ductless kit and the hood outlet.
g. REPEAT “STEP G – M” from STANDARD INSTALLATION.
Installation diagram available on next page