manual

ManualsBrandsWindster ManualsAppliances42 Inch Under Cabinet Ducted Hood

www.windsterhood.com

User’s Manual

RA-34LU30SS

RA-34LU36SS

RA-34LU42SS

RA-34LU48SS

Please read this operation manual thoroughly before

using your range hood. Store it in a safe location for

when you need to reference it in the future.

NOTE: PLEASE INSPECT HOOD

IMMEDIATELY UPON RECEIVING.

CLAIM OF DAMAGE AFTER 7 DAYS

OF DELIVERY WILL BE DENIED.

This unit is designed for indoor

residential use only. DO NOT USE

OVER A WOOD GRILL OR MOUNT

IN OUTDOOR ENVIRONMENT.

UNDER CABINET SERIES

WALL MOUNT SERIES



TABLE OF CONTENTS

Table of Contents

Safety Information .............................................................. 2 – 4

Content Checklist ..................................................................... 5

Measurements ........................................................................... 6

Preparation ......................................................................... 7 – 8

Installation ......................................................................... 9 – 10

Installation Diagram ................................................................ 11

Operation & Features ....................................................... 12– 15

Cleaning & Maintenance ......................................................... 16

Troubleshooting ...................................................................... 17

Part List / Replacement .................................................. 18 – 19

Warranty / Contact Us ..................................................... 20 – 22

Summary of content (12 pages)

PAGE 1
TABLE OF CONTENTS 1 Table of Contents www.windsterhood.com Safety Information .............................................................. 2 – 4 User’s Manual Content Checklist ..................................................................... 5 UNDER CABINET SERIES WALL MOUNT SERIES Measurements ........................................................................... 6 RA-34LU30SS RA-34LU36SS RA-34LU42SS RA-34LU48SS Preparation ..............................................................
PAGE 2
SAFETY INFORMATION 2 SAFETY INFORMATION SAFETY INFORMATION TO REDUCE THE RISK OF A FIRE, ELECTRICAL SHOCK, TO REDUCE THE RISK OF FIRE, OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.  AND/OR INJURY OBSERVE THE FOLLOWING:      Unit is intended for indoor residential use only. If you should have questions, contact the manufacturer at the address or telephone number listed in the warranty.
PAGE 3
SAFETY INFORMATION 4 5 CONTENT CHECKLIST CONTENT CHECKLIST PROP. 65 WARNING FOR CALIFORNIA RESIDENTS:  This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. 1. CONTENTS INCLUDED a. (1) RA-34L series (30”, 36” 42” or 48”) hood assembly b. (1) User’s manual c. (1) Black 6” to 7” conversion collar d. (2) Baffle filters w/ handles & (2) stainless steel filler (30” model only) e.
PAGE 4
MEASUREMENTS 6 7 PREPARATION PREPARATION 1. BEFORE YOU START **DO NOT INSTALL IF DAMAGED** **RETURN OR EXCHANGE WILL BE DENIED IF INSTALLED** a. Be sure you have all the content of your purchase and required tools for b. Installation may take at least 2 to 3 hours from start to finish. c. Plan to use as few elbows or turns as possible for more efficient air flow. d. Collar size may need to be increased if utilizing a long duct run. e. At least 12” of vertical duct is required before any turn.
PAGE 5
PREPARATION 8 9 INSTALLATION INSTALLATION 1. UNDER CABINET INSTALLATION a. Make sure all preparation steps are completed. b. Feed the wires coming out of the hood through the bottom of the cabinet. c. Lift the unit up flesh against the wall and the bottom of the cabinet. d. Using the screws and washers provided, insert into each of the keyhole openings and tightly secure the unit against the bottom of the cabinet. NOTE: Install more screws through the back of the unit if necessary. e. e.
PAGE 6
INSTALLATION 10 j. Use a spirit level to ensure the balance of the hood is true. k. Mount the unit onto wall with mounting screws (not included) (Fig. 2b) l. Determine the desired location for mounting the duct cover bracket and 11 INSTALLATION DIAGRAM INSTALLATION DIAGRAM secure it with the (2) screws provided. (Fig. 2c) NOTE: IF USING CFM reducer, connect the reducer to unit before continuing. m. Connect 6” ducting to the collar of the unit and secure it with aluminum tape. (Fig. 2d) n.
PAGE 7
OPERATION & FEATURES 12 OPERATION & FEATURES 1. EASY ACCESS CONTROL SWITCH (from left to right) OPERATION & FEATURES 13 4. REPLACING THE LIGHT SET **NOTE: BE SURE THE LIGHTS ARE NOT HOT * Use maximum of GU10 5W LED light bulb * a. Button 1 – ON / DELAY SHUTOFF / OFF b. Button 2 – Light control a. Twist outer light ring counter clock wise with light key. c. Button 3 – Speed control b. Outer light ring should drop down along with the light bulb. d. Blue color speed indicator c.
PAGE 8
OPERATION & FEATURES 14 Using the light fixture tool provided, lineup each corner of the fixture tool in parallel with the notches located on the outer ring of the light fixture. Twist the outer ring counter clockwise to unlock the light fixture housing. Light Fixture Tool 15 OPERATION & FEATURES 5. PUTTING IN THE OIL TRAY AND BAFFLE FILTERS a. Insert the oil tray into the unit at an angle. (Fig. 3a) b.
PAGE 9
CLEANING & MAINTENANCE 16 17 TROUBLESHOOTING CLEANING & MAINTENANCE WARNING!!! To prevent the possibility of a fire and explosion, do not use flammable liquids or solvents to clean the unit or any of its parts. TROUBLESHOOTING WARNING!!! Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit.
PAGE 10
PART LIST / REPLACEMENT 18 PART LIST / REPLACEMENT 19 PART LIST / REPLACEMENT # Description # Description 1 Duct cover bracket (optional) 12 6” – 7” transition collar 2 Duct cover (optional) 13 Air chamber 3 Hood bracket (optional) 14 Motor 4 Duct cover panel (optional) 15 Fan impeller 5 Hood body assembly 16 Protective grill 6 Oil tray bar 17 Oil funnel 7 GU10 5W LED lights 18a (2) baffle filters / (2) fillers (30” model) 8 Outer light ring 18b (2) baffle filters / (3) f
PAGE 11
20 WARRANTY / CONTACT US WARRANTY / CONTACT US WARRANTY / CONTACT US 21 *Windster Hoods, Inc. reserves the right to determine the validity of your warranty claim. LIMITED WARRANTY WHAT IS NOT COVERED BY MANUFACTURER WARRANTY Windster Hoods Inc. warrants its product against defects in material or workmanship as follows: 1. Labor: For a period of (1) year from the date of purchase, if the product is determined to be defective, Windster will attempt to repair the product, at its option, at no charge.
PAGE 12
22 WARRANTY / CONTACT US CONTACT US Windster Hoods, Inc. www.windsterhood.