manual


10
INSTALLATION
3. COLD WEATHER INSTALLATION (OPTIONAL)
a. Check with your local building codes to see if a CFM reducer is an
acceptable alternative to make-up air.
b. Remove the RA35CFMR (CFM Reducer) and inspect for any sign of
defect or damage. (ie. Cracks, broken flips)
c. For UNDER CABINET installation: COMPLETE Step A – D of Section
1 UNDER CABINET INSTALLATION THEN GO TO STEP E BELOW.
d. For WALL MOUNT installation: COMPETE Step A – H of Section 2
WALL MOUNT INSTALLATION THEN GO TO STEP E BELOW.
e. Place the CFM reducer onto the outlet of the unit and seal the connection
point with aluminum tape. (Be sure it is secure with no opening or gaps)
f. Connect an 8” ducting to the collar of the CFM reducer.
g. Finish off by sealing the connection point with aluminum tape.
Installation diagram available on next page

11 INSTALLATION DIAGRAM
INSTALLATION DIAGRAM
Fig. 2a Fig. 2b
Fig. 2c Fig. 2d