manual



TROUBLESHOOTING

WARNING!!!

Check to make sure all power sources are disconnected

before starting any troubleshooting. Safety gloves and glasses

should be worn when working on the unit. Serious injury or death

may occur if safety precautions are not followed.

RA-77 Series

GU10 LED Light Issue

(One light not turning on

or all not turning on)

1. Replace old defective GU10 fixture with new GU10

LED 5W light fixtures found at your local hardware

store.

Speed indicator not

showing speed levels

Complete control switch replacement is required.

Burnt/melted control

switch

Complete control switch replacement is required.

Speed levels not

working correctly

1. Check all wiring to and from the unit.

2. Complete control switch replacement is required.

Unit lacking smoke

intake

1. Check ducting for foreign object.

2. Ensure the ducting is properly sealed.

3. Clean filters to increase airflow.

Unit showing no power

indication

1. Make sure the power source is working properly.

2. All wiring is connected.

Unit making humming

noise

Replace defective capacitor with new one.



PART LIST / REPLACEMENT

# Description # Description

1 Duct cover bracket 9 Control switch

2 Duct cover 10 Control support panel

3 6” collar 11 Capacitor

4 Duct cover panel 12 Squirrel cage motor

5 Hood bracket 13 6” – 7” transition collar

6 Hood body assembly 14 Aluminum filters (RA-77)

7 GU10 5W LED lights 15 Baffle filters (Optional)

8 Light cover