RA-7730SS RA-7736SS RA-7742SS RA-7748SS For residential and indoor use only.
4 Limited Warranty P.15-P.16 WINDSTER recommends that all kitchen range hood be installed by a certified installer.
27” 35” 27”-35” If the hood is mounted too low, it may caused heat damaged and fire hazard.
IMPORTANT SAFETY INSTRUCTIONS WARNING – To reduce the risk of fire, electric shock, or injury to persons, observe the following: DO NOT spray any liquid form cleaner on hood surface including lights and control switch. To clean the range hood, spray liquid form cleaner directly onto cleaning cloth for hood cleaning. A.
code(s). - All electrial work have to be done by certified electrician. - This range hood requires a 120V/60Hz electrical supply and must meet local required safety code(s).
Installation and Maintenance must be carried out by qualified installer Duct cover and extension duct cover fitment may vary depend on the mounting height of the range hood. 5 Install the Upper Mounting Bracket and then adjust the duct to the required height. . Ensure the mounted range hood is level when installed for optimum performance. (Fig.4) NOT To fit the duct to the top of the chimney, slide the bottom lip under the black plastic plate and then lock into place with the 4 screws provided(Fig.
Fig. 6 Fig. 7 Use a level to balance out both sides to ensure the hood will be properly mounted. Mount the unit onto the wall with correct wall screws. (Note different types of walls require different types of screws) Fig. 8 Fig. 9 Prepare and extend the duct cover to your desired height for mounting. Measure and balance the duct cover bracket at the desired height. Fig. 10 Fig. 11 Install the aluminum flex hose to the outlet of the hood.
Black plastic plate. Fig. 12 Fig. 13 Correctly align the duct cover into black plastic plate. Fig. 14 Fig. 15 Evenly slide duct cover into the slot of the hood. Attach duct cover to duct cover bracket and screw in the screws provided. Fig. 16 Fig. 17 Screw in the screws into the bottom duct cover to the hood. Completed photo of how the finished installation should look like.
All figures below are for optional ductless installation. The steps will continue after Figure 9 above. Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 18 Figure 18 (Ductless kit box photo) –Remove the content from box. Kit will include: Fig. 19 - (1) Recirculation exhaust Fig. 20 - (1) Round collar Fig. 21 - (2) Charcoal filter Fig. 22 - (6) Screws Fig. 23 Measure and balance the recirculation exhaust and line it up with the exhaust opening in the duct cover. Fig.
Test the LED lights after putting the LED lights back into original position.
Problem Check power plug to see if it is plugged firmly into the power socket.
28 28 Range hood should be turn on before cooking to create air pocket. After cooking, range hood should be kept on for additional time until complete ventilation of cooking odor.
Model: RA-77 Series Switch holder Switch 12
29 Yellow LED Capacitor Brown White Green Black White Power R LED LED Driver Blue Gray Red White Motor Fig. 29 RA-77 Series Electrical Schematic Diagram RA-77 SERIES See M. DIAGRAMS (Page.
14
Limited Warranty Windster Hoods Inc. warrants this product against defects in material or workmanship as follows: 1) Labor: For a period of one (1) year from the date of purchase, if this product is determined to be defective, Windster will repair or replace the product, at its option, at no charge. After the warranty period, you must pay for all labor charges. During the “labor” warranty period there will be no charge for labor.
Defective Products: All products will be inspected, tested, and carefully packed by the manufacturer before shipping to customers. Products that are damaged during transit can only be exchanged for the same product, under the condition that the customer must get a RMA (Return Merchandise Authorization) from Windster. When products are received defective, you must notify us within the 3 business days of receiving the package. Replacement products are only shipped when the RMA is issued. NO EXCEPTIONS.
5101 Commerce Drive Baldwin Park, CA 91706 TEL: (626)962-8600 FAX: (626)962-8669