Specifications

1.Turnthethreenutsatthefrontofbottomboard.
2.Removescrewsonwiringcase,
fishoutwiresthroughthe
knockout.(Fig.12)
3.Marktheelectricalconnectionby
fasteningallwirestotheexisting
wallwiringaccordingtothetheir
colors.(BlacktoBlack,Whiteto
White,GreentoGround)
4.Afterconnectionisdone,reinstallwiringcasecoverandbottomboard.
5.Slideplasticcollectioncupsontothebackmetalmounting.
6.Turnonpowerandcheckoperationoffanandlight.
10
Fig.12
wirecase
1.
A.Bypressing,allfunctionsarestand-by.
B.Bypressingagain,allfunctionswillbeturnedoff.
Mainpowerbutton
NOTE: ALL FUNCTIONSCANBEWORKEDONLY UNDERTHE
MAINPOWERISON.
OFF
Mainpower
FanOFF
LEDlight
3speedfanselection
K.MAKINGTHEELECTRICALCONNECTION
L.USEANDCARE