User`s manual

7
PREPARATION
e. For cabinet with recessed-bottom, use (2) 3” x 12” or 15” wood strips on
both sides to balance the recession. Use (4) 1-1/4” long flat head screws
to secure the wood strips to cabinet. (Fig. 1c)
3. HOOD
a. Inspect for any sign of defect or damage. (ie. scratches, dents, loose
seams, etc.)
b. Power up the unit to make sure it is working properly.
c. Remove (2) aluminum filters and (1) stainless steel filler. (30” model only)
d. Remove the protective file on the stainless steel filler.
e. Remove (3) Aluminum filters. (36” model only)