manual

ManualsBrandsWindster ManualsAppliances42 Inch Under Cabinet Ducted Hood

www.windsterhood.com

User s Manual

WS-3230SS

WS-3236SS

WS-3242SS

WS-3248SS

Please read this operation manual thoroughly before

using your range hood. Store it in a safe location for

when you need to reference it in the future.

NOTE: PLEASE INSPECT HOOD

IMMEDIATELY UPON RECEIVING.

CLAIM OF DAMAGE AFTER 7 DAYS

OF DELIVERY WILL BE DENIED.

This unit is designed for indoor

residential use only. DO NOT USE

OVER A WOOD GRILL OR MOUNT

IN OUTDOOR ENVIRONMENT.

UNDER CABINET SERIES

WALL MOUNT SERIES

14-32-1A 11010

Windster Hoods, Inc.

www.windsterhood.com

Information subject to change without notice.

WARRANTY / CONTACT US

WHAT IS NOT COVERED BY MANUFACTURER WARRANTY

1. Damages resulting from any of the following:

a. Improper installation or maintenance

b. Any repair, modification, alteration or adjustment not authorized

by the manufacturer or an authorized service dealer

c. Misuse, accidents, and/or neglect

d. Incorrect electric current, voltage or power supply

e. Improper setting of any control (Pressing multiple selections at

the same time)

f. Improper chemical cleaning (commercial or industrial cleaning

agents)

2. Products purchased for use in an outdoor, commercial, and/or industrial

setting (such as in a hotel, office, restaurant, or other business)

3. Damage resulting from natural disasters (earthquake, flood, storm, etc.)

4. Regular maintenance for the product

5. Wear and maintenance items such as:

a. Aluminum Filters, Baffle Filters, Charcoal Filters, Mesh Filters,

Oil cups, Lighting bulbs, light fixtures etc.

6. Corrosion

7. Oil Cup

8. Motor Cage

9. Light Bulbs

No returns refunds exchanges if the hood

• Is missing parts

• Been Installed

• Been Used

Summary of content (8 pages)

PAGE 1
5 WARRANTY / CONTACT US WHAT IS NOT COVERED BY MANUFACTURER WARRANTY 2. 3. 4. 5. 6. 7. 8. 9. Damages resulting from any of the following: a. Improper installation or maintenance b. Any repair, modification, alteration or adjustment not authorized by the manufacturer or an authorized service dealer c. Misuse, accidents, and/or neglect d. Incorrect electric current, voltage or power supply e. Improper setting of any control (Pressing multiple selections at the same time) f.
PAGE 2
1 TABLE OF CONTENTS WARRANTY / CONTACT US Table of Contents 14 WARRANTY / CONTACT US LIMITED WARRANTY Safety Information ............................................................... 2 - 3 Windster Hoods Inc. warrants its product against defects in material or workmanship as follows: Content Checklist .....................................................................
PAGE 3
13 LIGHT BULB INSTALLATION Using the light fixture tool provided, lineup each corner of the fixture tool in parallel with the notches located on the outer ring of the light fixture. Twist the outer ring counter clockwise to unlock the light fixture housing. Light Fixture Tool WARNING!!! Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit.
PAGE 4
3 SAFETY INFORMATION PART LIST / REPLACEMENT PART LIST / REPLACEMENT D. Use an extinguisher ONLY if: 1. You know you have a Class ABC extinguisher, and you already know how to operate it. 2. The fire is small and contained in the area where it started. 3. The fire department is being called. 4. You can fight the fire with your back to an exit.
PAGE 5
11 CONTENT CHECKLIST TROUBLESHOOTING TROUBLESHOOTING CONTENT CHECKLIST 1. CONTENTS INCLUDED WARNING!!! a. (1) WS32 series(30" , 36" , 42" or 48")hood assembly Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit. Serious injury or death may occur if safety precautions are not followed. b. (1) User’s manual c. (1) 7" conversion collar d.
PAGE 6
5 MEASUREMENTS 10 CLEANING& MAINTENANCE WARNING!!! To prevent the possibility of a fire and explosion, do not use 15/16" Fig.1a 12" 2-1/4" 8-1/4" 10-7/8" flammable liquids or solvents to clean the unit or any of its parts.
PAGE 7
9 PREPARATION 3. REMOVING THE FILTERS Baffle Filter a. 6 Aluminum Filter Set (Optional) i Push the handles back/down into the hood and. ii Tilt the filters towards you. a. Pull up on the filter latch, tilt towards you and remove the filter. PREPARATION 1. BEFORE YOU START **DO NOT INSTALL IF DAMAGED** **RETURN OR EXCHANGE WILL BE DENIED IF INSTALLED** ii a. Be sure you have all the content of your purchase and required tools for this installation. i b. i Push the frame back/down into the hood.
PAGE 8
7 INSTALLATION PREPARATION 8 INSTALLATION Fig. 1c - Cabinet UNDER CABINET INSTALLATION (Top round outlet) FRONT OF CABINET 11 (30" CABINET) 14 (36" CABINET) 17 (42" CABINET) 20 (48" CABINET) CABINET SIDE CABINET SIDE CABINET BOTTOM VIEW 7.5-8" ROUND EXHAUST a. Make sure all preparation steps are completed. b. Feed the wires coming out of the hood through the bottom of the cabinet. c. Lift the unit up flesh against the wall and the bottom of the cabinet. d.