manual

7 PREPARATION
e. For cabinet with recessed-bottom, use (2) 3" x 12" or 15" wood strips on
both sides to balance the recession. Use (4) 1-1/4" long flat head screws
to secure the wood strips to cabinet. (Fig. 1d)
3. HOOD
a. Inspect for any sign of defect or damage. (ie. scratches, dents, loose
seams, etc.)
b. Power up the unit to make sure it is working properly.
c. Remove the aluminum filter and unscrew the fillers.
d. Remove the protective film on the filters and fillers.
Fig. 1d - Cabinet w/ recessed-bottom
Fig. 1c - Cabinet
½"
FRONT OF CABINET
BACK OF CABINET
CABINET BOTTOM VIEW
CABINET SIDE
CABINET SIDE
ELECTRICAL OUTLET
7.5-8"
ROUND
EXHAUST
11 (30" CABINET)
14 (36" CABINET)
17 (42" CABINET)
20 (48" CABINET)
½"
FRONT OF CABINET
BACK OF CABINET
CABINET BOTTOM VIEW
WOOD STRIP
CABINET SIDE
ELECTRICAL OUTLET
7.5-8"
ROUND
EXHAUST
11 (30" CABINET)
14 (36" CABINET)
17 (42" CABINET)
20 (48" CABINET)
3"
CABINET SIDE
WOOD STRIP
8INSTALLATION
INSTALLATION
UNDER CABINET INSTALLATION (Top round outlet)
a. Make sure all preparation steps are completed.
b. Feed the wires coming out of the hood through the bottom of the cabinet.
c. Lift the unit up flesh against the wall and the bottom of the cabinet.
d. Using the screws and washers provided, insert into each of the keyhole
openings and tightly secure the unit against the bottom of the cabinet.
NOTE: Install more screws through the back of the unit if necessary.
e. Connect 7" ducting to the collar of the hood.
f. Finish off by sealing the connection point with aluminum tape.
OPERATION & FEATURES
1. CONTROL SWITCH LAYOUT (from left to right)
a. Power ON / OFF
b. Low speed
c. Medium speed
d. High speed
e. Lights ON / OFF
2. FILTERS
a. (2) 14-3/8" x 12-3/4" Baffle filters and (2) fillers (30" model)
b. (2) 14-3/8" x 12-3/4" Baffle filters and (2) fillers (36" model)
c. (3) 14-3/8" x 12-3/4" Baffle filters and (2) fillers (42" model)
d. (3) 14-3/8" x 12-3/4" Baffle filters and (2) fillers (48" model)
Activate delay shut-off: Press “Button A" once to activate 90 seconds delay
shut-off. Light surrounding button will flash and fan will turn off after 90 seconds.
Turn off Fan: Press “Button A" twice to instantly turn off the fan.
a b c d e